Air Tanks

Got questions? We got answers....
Post Reply
TD3
Member
Posts: 50
Joined: 05:12 am Jun 03 2005
Country:
Location: Maine, USA

Air Tanks

Post by TD3 »

I've been doing a little research on fork air tanks. They seem to be a pretty good setup for taking away some of the harsh feel of the front forks. I've got a bunch of links and info on what's available and also DIY setup's if anyone is interested.

http://www.aircellracing.com/
http://www.racingsuspensionproducts.com/subtanks.html

Any thoughts ?
User avatar
m0rie
Supporting Member I
Supporting Member I
Posts: 2220
Joined: 10:25 pm Nov 29 2004
Country:
Location: Crescent City, CA

Post by m0rie »

How useful are the sub tanks away from the track?
1989 KDX 200
2007 TTR-50E
TD3
Member
Posts: 50
Joined: 05:12 am Jun 03 2005
Country:
Location: Maine, USA

Post by TD3 »

The tanks are supposed to work great offroad. From what I've read, they really soften up the low end of the stroke while maintaining good bottoming resistance. Kind of like running low oil levels without sacrificing upper level firmness. The offroad guys over at KTMTALK love them.
The tanks are kinda pricey, but you can build for $50 to $100 depending on the metering valves used.
User avatar
skipro3
Gold Member
Gold Member
Posts: 4329
Joined: 11:58 pm Nov 04 2004
Country:
Location: BANNED FOR LIFE!!
Contact:

Post by skipro3 »

So tell us more about the homemade version.
Jerry

I'd rather be a smartass like carvr, than a dumbass like.... well, you fill in the blank!
TD3
Member
Posts: 50
Joined: 05:12 am Jun 03 2005
Country:
Location: Maine, USA

Post by TD3 »

Here are a couple links to some DIY setups.
http://members.cox.net/oldernyzer/sub_tanks.htm
http://members.cox.net/raribley/tanks

There are a couple different approaches to fabricating the tanks. Single or double made of aluminum, pvc and just plain tubing.

The metering valves can be either meter out of forks/ free flow back or meter both directions. Two camps on this, you’d have to make a choice.

The fittings and hose are readily available online.

Sorry for the short reply, but I had shoulder surgery last week and I’m having a hard (and frustrating) time typing with one hand. I do have a bunch of notes (Word doc’s), links and pictures That I could “zip” up and send to anyone interested.

-Mike
User avatar
m0rie
Supporting Member I
Supporting Member I
Posts: 2220
Joined: 10:25 pm Nov 29 2004
Country:
Location: Crescent City, CA

Post by m0rie »

Mike - I'd be interested in copy of the zip just to read thru.
1989 KDX 200
2007 TTR-50E
User avatar
skipro3
Gold Member
Gold Member
Posts: 4329
Joined: 11:58 pm Nov 04 2004
Country:
Location: BANNED FOR LIFE!!
Contact:

Post by skipro3 »

m0rie; once he sends you the info, how about posting it up for all of us. You have good body parts still, right?
Jerry

I'd rather be a smartass like carvr, than a dumbass like.... well, you fill in the blank!
IdahoCharley
Supporting Member II
Supporting Member II
Posts: 1005
Joined: 06:57 pm Mar 19 2005
Country:

Post by IdahoCharley »

My thoughts- The stock KDX forks are not harsh in the area where the sub-tanks work best if your sprung correctly and adjust your compression valving.

Those of us with WP forks have not really figured out "why" the forks are harsh - hydraulic lock due to piston valve sizing and/or design; mid-valve problems; ratio of fluid flow through damper rod vs base valve; hydraulic stopper length; the third bushing on the 03 and 04s; stiction issues with WP seals; etc.

Those with KX forks may benefit for off-road riding - but then again you can revalve the forks.
KTM 380EXC Mine
KDX 200 Mark's
TTR 125 L Wife's
KDX 200 Austin's
EC 300 Tyson's
WR430 Husky - mine
Post Reply