Page 1 of 1
which piston do you run?
Posted: 07:44 pm Jan 13 2006
by the trail rider
what piston do you run in your kdx.
Posted: 07:46 pm Jan 13 2006
by Indawoods
220 or 200?
Posted: 07:48 pm Jan 13 2006
by the trail rider
both. since you can manipulate it put in a vote for whatever you have in either of your bikes. for other people sorry,.
Posted: 09:06 pm Jan 13 2006
by Indawoods
2 different animals and someone might get the wrong idea....
Posted: 10:13 pm Jan 13 2006
by Indawoods
Fixed it for ya....
Posted: 01:08 pm Jan 14 2006
by the trail rider
thanks..
Posted: 12:30 am Jan 15 2006
by Lutz
Neither?
I run a Wiseco...mainly because its the only option (that I know of) for me due to the big bore. Technically, it's sold as a 1.0 mm over 220 piston.
Posted: 09:47 am May 29 2006
by Actarus
I will be using a wiseco one when the engine will be back togheter. 66mm
Posted: 05:27 pm May 26 2010
by performancecycle
I have not installed it yet but, a wiseco 66mm forged piston is what I am going to run. A forged billet piston is much stronger and will not detinate and shatter near as easily as a lesser piston.
Posted: 06:40 pm May 26 2010
by Julien D
I have a 200. I run whatever I can find a good deal on when a piston is needed. 1st rebuild was with a pro-x bought on Ebay for $50, last rebuild was with a Wiseco bought on ebay for $65. I have had fine experience with both, and would not hesitate to run either. A wiseco will almost certainly last longer than a pro-x/stock.
Obviously if you have a 220 you NEED to run a Wiseco.
Posted: 07:37 pm May 26 2010
by scheckaet
65 for a wiesco? I never see that kind of deal when I need one
Posted: 10:30 am May 27 2010
by fuzzy
stock IS pro-x
Posted: 11:01 am May 27 2010
by Julien D
Indeed it is.
Posted: 04:18 pm Jul 12 2011
by GreatBritishRob
Wossner Forged piston in my 220.