KDXRIDER.NET

hi all,as above .
T I A Mark

two-stroke-brit wrote:hi all,as above .
T I A Mark

Man that would be cool. Are clear bowls available for ANY carb?

"Good job, guys. "

Lectrons are the only carb I have seen with a clear bowl.

Plastic bowls arent without their problems though.

Are you wanting one for the "cool" factor or for setting the float height?

here are some for 30mm PWKs

http://www.ebay.com/itm/OKO-SPARE-PARTS ... B-&vxp=mtr

and in answer to TEDs question a bit of both really.
cheers mark

^ that's cool.
Not a terrible price to pay to check fuel level/float height is spot on. I'd put the metal one back on after checking.

IDRIDR wrote:^ that's cool.
Not a terrible price to pay to check fuel level/float height is spot on. I'd put the metal one back on after checking.

thats the plan.

but still cant locate a clear bowl for a 35pwk.

The clear bowl isn't going to really help you with setting the float. The fuel level should be 0-2mm above the carb body-bowl mating surface.

This is how I mimicked the factory approach to setting the float: setting float

Related, but off-topic. Has anybody else heard/confirmed the rumor that Keihin may be ending production on Airstriker/PWKs?

thanks tedh98 .
I wondered how the home made set up would look/work.
i will make one myself thanks for sharing.
cheers mark

Tedh98 wrote:The clear bowl isn't going to really help you with setting the float. The fuel level should be 0-2mm above the carb body-bowl mating surface.

This is how I mimicked the factory approach to setting the float: setting float

Nice simple little tool!

Clear fuel line and a couple nipples on 90's from the top and bottom of the float bowl would make an easy to see anytime gauge.