200 kdx jetting
-
- Member
- Posts: 86
- Joined: 01:26 am Sep 28 2010
- Country:
- Location: alberta
200 kdx jetting
I have a 95kdx engine in my hybrid build, engine was fully rebuilt, has rd head, rd carb , boyseen rad valve, fmf knarly dessert pipe , and uni filter. What is everyone else using for jetting ? I have a 89 kdx with all the same mods and it has way more hit low mid and top. I jetted my 95 the same as my old kdx was that the wrong decision??
-
- Supporting Member II
- Posts: 925
- Joined: 10:00 am Jan 04 2014
- Country:
Re: 200 kdx jetting
every bike is different- it would be best to start with the jetting guide.
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
200 kdx jetting
yesstomlinson wrote:I have a 95kdx engine in my hybrid build, engine was fully rebuilt, has rd head, rd carb , boyseen rad valve, fmf knarly dessert pipe , and uni filter. What is everyone else using for jetting ? I have a 89 kdx with all the same mods and it has way more hit low mid and top. I jetted my 95 the same as my old kdx was that the wrong decision??
work your way up from the pilot
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
- C George
- Supporting Member II
- Posts: 550
- Joined: 04:50 pm May 09 2013
- Country:
- Location: Vermont
200 kdx jetting
If it has a true RB carb ,,, Ron is very good at getting the jetting spot on out of the box. " If he knows all the mods "
05 KDX-220R / 06 KDX-225R / Maxima 927 / Millenium Tech / Ron Black / PC , FMF / Many 220 engine mods / 40 + yrs. of riding dirt bikes
-
- Member
- Posts: 86
- Joined: 01:26 am Sep 28 2010
- Country:
- Location: alberta
Re: 200 kdx jetting
Ok so i have tried jetting it differently but the power still sucks compaired to my 89 :( i was talking to another friend that has a 220 and he said his bike is alot slower then other kdx220s with the exact same mods. Did we just get the engines built at quiting time on a friday afternoon or something cause im not happy with this engines performance at all.
- Jaguar
- Supporting Member
- Posts: 590
- Joined: 01:32 am Jul 03 2013
- Country: Paraguay
- Location: Paraguay
- Contact:
Re: 200 kdx jetting
one main difference between the E and H models was that the H had its ignition timing retarded 2 degrees.
Take off the flywheel and turn the stator plate CW to be more advanced timing like the E series.
Take off the flywheel and turn the stator plate CW to be more advanced timing like the E series.
Performance CDI -- KDX motocross mods -- the SR KDX -- expansion chamber analysis---> http://www.dragonfly75.com/moto/
- C George
- Supporting Member II
- Posts: 550
- Joined: 04:50 pm May 09 2013
- Country:
- Location: Vermont
Re: 200 kdx jetting
Jaguar wrote:one main difference between the E and H models was that the H had its ignition timing retarded 2 degrees.
Take off the flywheel and turn the stator plate CW to be more advanced timing like the E series.
+1 ,,,, agree 100% . I'd guess they made that call based off the fuel quality that these bikes might see.
05 KDX-220R / 06 KDX-225R / Maxima 927 / Millenium Tech / Ron Black / PC , FMF / Many 220 engine mods / 40 + yrs. of riding dirt bikes