1990 kdx 250 wiring

Got questions? We got answers....
Post Reply
corvetterob
Member
Posts: 5
Joined: 10:21 am May 06 2016
Country:
Location: NEWCASTLE / UNITED KINGDOM

1990 kdx 250 wiring

Post by corvetterob »

Hi everyone. My name is Rob from Newcastle, United Kingdom, im wondering if you could help me out, im restoring my bike a 1990 kdx 250 and have ran into problems with the wiring, most of it seems to join up colour coded, but im having problems with 2 black with white line wires, 1 black with lime green wire coming from cdi, also there is a brown wire and a white wire hanging from main harness not sure if these connect to the engine stop switch, but these wires are yellow and red,also have a white and green stripe wire coming from bottom of rad temp sender, dont know where this connects to,i have been looking for diagrams on the 1990 250 but have had no luck, my cdi has 9 wires coming from it, on looking at the 89/91 they seem different, any help regarding the harness and cdi wiring would be greatly appreciated.
Post Reply