Wossner Piston Question

Got questions? We got answers....
Post Reply
CrashTestDummy2
Member
Posts: 30
Joined: 02:32 pm Nov 17 2015
Country:

Wossner Piston Question

Post by CrashTestDummy2 »

I've ordered a new Wossner piston kit for my '96 KDX 200. I can't find any information on wrist pin bearings. Can I just use a new OEM bearing? A Wiseco bearing? What?


Fred B.
cornishwrecker220
Member
Posts: 743
Joined: 06:37 am Nov 22 2009
Country:
Location: united kingdom

Wossner Piston Question

Post by cornishwrecker220 »

Yes, you can use OE , Wiseco, Mitaka small end bearing with the Wossoner piston kit....Wossoner pistons come in 3 sizes so make sure you take note of the correct piston you require .
Excellent & well made Pistons , I run one in my 220.
CrashTestDummy2
Member
Posts: 30
Joined: 02:32 pm Nov 17 2015
Country:

Re: Wossner Piston Question

Post by CrashTestDummy2 »

Thanks Cornish! I just ordered the standard (65.94mm) piston because I'm having the cylinder re-plated anyway. Once the piston arrives I'll send it and the top end parts off to Eric Gorr. I asked about the wrist pin bearing because I thought I read that a Wiseco piston requires you to use a Wiseco bearing, so I wanted to be sure the Wossner didn't have a similar requirement.


Fred B.
s10gto
Supporting Member I
Supporting Member I
Posts: 500
Joined: 07:35 pm Nov 06 2013
Country:

Wossner Piston Question

Post by s10gto »

Nice choice. I used a pro x bearing. No issues
Post Reply