Page 2 of 2

2001 kdx200 keeps fouling plugs

Posted: 12:14 am Sep 02 2015
by Sgt.harper48
Ohgood I went and bought 2 br8es and 2 br8eix will conduct test later today to see what goes with it but both types are ngk. I will make sure to include air temp, relative humidity, octane, ratio will be 32:1 with 155 main 45 pilot clip 3rd pos. brand new no toil air filter with the gnarly pipe and power core 2 silencer as well as the 607 reeds from boyesen and air on snorkel removed only. If I've left out anything I will need to include on the this test when reporting back please let me know.

Re: 2001 kdx200 keeps fouling plugs

Posted: 12:38 am Sep 02 2015
by 6 Riders
To the OP.......If your carb was dipped In a chemical bath, then you probably need a new jet block gasket. While you have the carb off, check to make sure the reeds are still good and your air filter is clean.

Re: 2001 kdx200 keeps fouling plugs

Posted: 04:17 am Sep 02 2015
by 6 Riders
Also, I did send you an E-mail. I didn't mention the gasket, since that was left out of the E-Mail. If you need you can bring the bike by, but my days off next week are Tues/Wed.