DC system back to AC

Got questions? We got answers....
Post Reply
Railinandnailin
Member
Posts: 39
Joined: 11:32 am Aug 14 2014
Country: United States
Location: Central PA

DC system back to AC

Post by Railinandnailin »

Hi guys, my DC electric system I set up isn't working well for me so I want to convert it back to AC for better power. I have the stator rewound and ground floated. Is it possible for me to use the floated ground output with the stock regulator? Can I just ground the second output to the frame instead of taking it apart and grounding it out at the stator? It just makes it easier if I could.
User avatar
Jaguar
Supporting Member
Posts: 590
Joined: 01:32 am Jul 03 2013
Country: Paraguay
Location: Paraguay
Contact:

Re: DC system back to AC

Post by Jaguar »

one side of the stator output is grounded on a KDX200.
run a wire from the floating wire to the crankcase metal to ground it. (which wire is important. only the correct one of the two can be grounded)
Performance CDI -- KDX motocross mods -- the SR KDX -- expansion chamber analysis---> http://www.dragonfly75.com/moto/
Railinandnailin
Member
Posts: 39
Joined: 11:32 am Aug 14 2014
Country: United States
Location: Central PA

Re: DC system back to AC

Post by Railinandnailin »

Jaguar wrote:one side of the stator output is grounded on a KDX200.
run a wire from the floating wire to the crankcase metal to ground it. (which wire is important. only the correct one of the two can be grounded)
I was able to trace wires from my stock harness and ran the floated ground to the ground input for the stock regulator. Then all output is connected to that. It worked out fine. Thanks
Post Reply