So a friend helped me rebuild my top end (my first time) anyways after a "successful completion" or so I thought. I found these laying on the ground.
I have no idea where they go! Help would be appreciated
Thanks (01 KDX 200)
Uh oh, extra parts after top end rebuild
-
- Member
- Posts: 11
- Joined: 08:32 pm May 31 2015
- Country:
- doctord23
- Supporting Member
- Posts: 323
- Joined: 01:29 pm Jul 28 2009
- Country: USA
- Location: NorCal
Re: Uh oh, extra parts after top end rebuild
Bushings for the kips valves.
Pull the head and put them in.
Pull the head and put them in.
My Team Green:
2002 KX-KDX 220
2000 KDX 220
2003 KLX 300 DS
1988 White KDX 200C3
1984 KX500 (original owner)
1996 Honda Magna V4
2017 Honda Africa Twin DCT
2002 KX-KDX 220
2000 KDX 220
2003 KLX 300 DS
1988 White KDX 200C3
1984 KX500 (original owner)
1996 Honda Magna V4
2017 Honda Africa Twin DCT
- 6 Riders
- Gold Member
- Posts: 2124
- Joined: 12:58 pm May 01 2013
- Country: USA
- Location: Washington
- Contact:
Uh oh, extra parts after top end rebuild
Ah ,hell, everything that I do has "extra" parts left over...toss 'em in the trash and pretend like you didn't see them tell the wife that "those parts were "never there" when you need to buy new ones
OR....do what Doc said and put them where they go
(tonight is my "drinking night, don't mind me)
newbbewb wrote:^what he said.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually typemasterblaster wrote:Man 6 riders you rock.
-
- Member
- Posts: 99
- Joined: 11:48 am Feb 11 2014
- Country:
Re: Uh oh, extra parts after top end rebuild
Pull the head and install them. They MUST be installed. If not binding could occur with the sub-valves and now your talking stripped gear teeth and $$ to spend to replace. If you want the KIPPS to operate you MUST do this. Put some 2-stroke oil on them before installation.
-
- Member
- Posts: 99
- Joined: 11:48 am Feb 11 2014
- Country:
Re: Uh oh, extra parts after top end rebuild
Also, I would recommend using a new head gaset when you put the head back on.
-
- Member
- Posts: 11
- Joined: 08:32 pm May 31 2015
- Country:
Uh oh, extra parts after top end rebuild
Thanks! Is it pretty obvious where it goes when I get the head off? Also under the kips cover on the exhaust side should the gear be turned clockwise or counter clockwise before setting the metal rake thing? Pardon my technical jargon lol
Btw there is no marking on that gear to line it up like there is supposed to be, I've looked
Btw there is no marking on that gear to line it up like there is supposed to be, I've looked
- doctord23
- Supporting Member
- Posts: 323
- Joined: 01:29 pm Jul 28 2009
- Country: USA
- Location: NorCal
Re: Uh oh, extra parts after top end rebuild
Yes it should be obvious that the bushings slide in the top of the head around the kips valve shafts.
Counterclockwise. The rake as you call it activates clockwise which will turn the kips drive gear clockwise.
With the drive gear clockwise, both sub-valves should be closed.
Counterclockwise. The rake as you call it activates clockwise which will turn the kips drive gear clockwise.
With the drive gear clockwise, both sub-valves should be closed.
My Team Green:
2002 KX-KDX 220
2000 KDX 220
2003 KLX 300 DS
1988 White KDX 200C3
1984 KX500 (original owner)
1996 Honda Magna V4
2017 Honda Africa Twin DCT
2002 KX-KDX 220
2000 KDX 220
2003 KLX 300 DS
1988 White KDX 200C3
1984 KX500 (original owner)
1996 Honda Magna V4
2017 Honda Africa Twin DCT
-
- Member
- Posts: 11
- Joined: 08:32 pm May 31 2015
- Country:
Re: Uh oh, extra parts after top end rebuild
Ok bushings are in and counterclockwise is how I put it in, should there be any gaskets or anything around the bushings! I want to make sure before I put it back together
Thanks for the quick responses!
Thanks for the quick responses!
- doctord23
- Supporting Member
- Posts: 323
- Joined: 01:29 pm Jul 28 2009
- Country: USA
- Location: NorCal
Re: Uh oh, extra parts after top end rebuild
The head gasket is the only gasket.
I suggest looking closely at a service manual for the kips timing before you button it up.
On the two sub-valves, they should go from full closed to full open when you rotate the main gear clockwise.
Look in though the exhaust port to verify.
I suggest looking closely at a service manual for the kips timing before you button it up.
On the two sub-valves, they should go from full closed to full open when you rotate the main gear clockwise.
Look in though the exhaust port to verify.
My Team Green:
2002 KX-KDX 220
2000 KDX 220
2003 KLX 300 DS
1988 White KDX 200C3
1984 KX500 (original owner)
1996 Honda Magna V4
2017 Honda Africa Twin DCT
2002 KX-KDX 220
2000 KDX 220
2003 KLX 300 DS
1988 White KDX 200C3
1984 KX500 (original owner)
1996 Honda Magna V4
2017 Honda Africa Twin DCT