PC Platinum 2 and kick lever
-
- Member
- Posts: 52
- Joined: 07:17 pm Nov 25 2013
- Country:
- Location: Ontario Canada
PC Platinum 2 and kick lever
Just put the pipe on and noticed the kicker contacts the pipe when folded in. Is this normal? I've never saw this mentioned when researching pipes.
- 6 Riders
- Gold Member
- Posts: 2124
- Joined: 12:58 pm May 01 2013
- Country: USA
- Location: Washington
- Contact:
Re: PC Platinum 2 and kick lever
Try clocking the kicker one notch and see if that helps.
newbbewb wrote:^what he said.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually typemasterblaster wrote:Man 6 riders you rock.
-
- Member
- Posts: 54
- Joined: 04:02 am Jul 26 2011
- Country:
Re: PC Platinum 2 and kick lever
mine just touches my kx125 kicker, I ground the end of the kicker on an angle so its not as pronounced.
-
- Member
- Posts: 52
- Joined: 07:17 pm Nov 25 2013
- Country:
- Location: Ontario Canada
Re: PC Platinum 2 and kick lever
I thought about clocking it but even if I did, in order for it not to touch the pipe it would be sticking out to far when folded in. It's contacting at the half way point of the kicker and the tip is touching where the pipe mount meets the pipe. I might just find something that won't cook on the pipe and wrap the kicker with it.
-
- Supporting Member II
- Posts: 444
- Joined: 09:55 pm May 08 2011
- Country:
- Location: butler mo USA
PC Platinum 2 and kick lever
I have a pc platinum pipe older version and my stock kicker does not touch. The kicker is basically parallel with the frame.
-
- Member
- Posts: 52
- Joined: 07:17 pm Nov 25 2013
- Country:
- Location: Ontario Canada
Re: PC Platinum 2 and kick lever
Interesting, I think the PC2 might be wider. How do you like that pipe? You on a 200 or 220?
-
- Supporting Member I
- Posts: 223
- Joined: 06:07 pm Dec 14 2014
- Country:
PC Platinum 2 and kick lever
I don't believe my lever touches my Platinum 2.
I can check when I get home.
I can check when I get home.
-
- Member
- Posts: 52
- Joined: 07:17 pm Nov 25 2013
- Country:
- Location: Ontario Canada
-
- Supporting Member II
- Posts: 444
- Joined: 09:55 pm May 08 2011
- Country:
- Location: butler mo USA
Re: PC Platinum 2 and kick lever
It's on a 220 I like it, good torque with a good hit on top.
-
- Member
- Posts: 52
- Joined: 07:17 pm Nov 25 2013
- Country:
- Location: Ontario Canada
PC Platinum 2 and kick lever
Well don't I feel stupid. After looking at some photos of other Kdx's with the pipe I realized what is meant by clocking it. I thought u guys meant rotate it out. Anyways I appreciate the help. Thanks.