Sea level jetting

Got questions? We got answers....
Post Reply
Surfnjmatt
Member
Posts: 15
Joined: 05:33 pm Sep 05 2014
Country:

Sea level jetting

Post by Surfnjmatt »

Run mostly tight woods in southern nj, looking for jetting tips for my kdx220

Fmf gnarly pipe
Turbine core 2
Boyesen reeds

I bought it used so I'm not sure what is supposed to be there.

Thanks. I did look at jetting data base but confusing for a newbie
cornishwrecker220
Member
Posts: 743
Joined: 06:37 am Nov 22 2009
Country:
Location: united kingdom

Sea level jetting

Post by cornishwrecker220 »

First I would fit a new spark plug... Clean & oil your air filter & repack your silencer.... Fresh fuel mix at 40.1.... Jetting for sea level approximately .. 40 pilot jet ..main jet 145 .. Needle in the mid position & air screw 1.5 turns out ...these are basic settings & can be tweeked + or _ . :grin:
Post Reply