Page 1 of 1

No Balls??

Posted: 12:48 pm Dec 07 2014
by Surfnjmatt
I have a 2000 kdx 220 and it just seems to have I balls in 1st and 2nd. It just winds out do fast.

I always read about the kdx putting you in your ass but I am a pretty novice rider and it just doesn't seem to have it.

In 3rd it will get some too end speed but where is my bottom?

The bike had a 49 renthal rear spriket when I bought it and I am 190lb without gear.

Could this be a symptom of bad reeds or low compression??

Re: No Balls??

Posted: 01:12 pm Dec 07 2014
by Surfnjmatt
I am also getting a puddle of premix (not filter oil) in the air boot

Re: No Balls??

Posted: 02:26 pm Dec 07 2014
by Tedh98
You should check your reeds and compression. I would also make sure your KIPS is working and aligned correctly.

Re: No Balls??

Posted: 02:41 pm Dec 07 2014
by s10gto
I agree. If you got good compression pull the reeds out. Fuel oil in box is a good sign of the reeds curled open or broke. A 47T rear is stock so your should have nice bottom end with a 49T.

If all is ok like Tedh98 said check the KIPS timing. If someone did a top end some of the manuals are wrong and your KIPS maybe open all the time.

Re: No Balls??

Posted: 10:24 am Dec 09 2014
by JasonK94Z
You don't mention any mods to the bike. Pipe? Also, check you jetting. Not only did a pipe wake my 220 up, the jetting afterwards really got it going.

Re: No Balls??

Posted: 10:40 pm Dec 12 2014
by KDX_Johnny
He has a full FMF... Looks like the woods though :cry:

Re: No Balls??

Posted: 04:24 am Dec 13 2014
by KDXGarage
How long has it been since the last top end was done?