FMF spring and o ring kit for 220?

Got questions? We got answers....
Post Reply
TAT2
Supporting Member II
Supporting Member II
Posts: 74
Joined: 12:21 am Sep 24 2014
Country:

FMF spring and o ring kit for 220?

Post by TAT2 »

Seems FMF does not list a spring and o ring kit for a KDX220. Does anyone know what will work?

T
User avatar
diymirage
Supporting Member II
Supporting Member II
Posts: 2909
Joined: 05:00 pm Sep 19 2011
Country:
Location: michigan

Re: FMF spring and o ring kit for 220?

Post by diymirage »

not sure about the o rings (i always one the ones included in the top end kit) but the last time i needed springs i just walked into my local bike shop and they pulled a set from the shelf
i think they were 75MM but im not sure
newbbewb wrote:DIYmirage has it right.


-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
TAT2
Supporting Member II
Supporting Member II
Posts: 74
Joined: 12:21 am Sep 24 2014
Country:

FMF spring and o ring kit for 220?

Post by TAT2 »

I am a noob.... so I did not know the o rings came in a top end kit. I may need to put in a Wiseco. I need to check compression still and what piston is in it.

T
Fitterman24
Supporting Member II
Supporting Member II
Posts: 96
Joined: 10:28 am Jul 13 2013
Country:

FMF spring and o ring kit for 220?

Post by Fitterman24 »

Ebay has springs--even in stainless steel. Just a upper end gasket set has the o-rings. I used a set of o-rings from the local Ace Hardware store. They worked just fine with some high temp silicone.
TAT2
Supporting Member II
Supporting Member II
Posts: 74
Joined: 12:21 am Sep 24 2014
Country:

Re: FMF spring and o ring kit for 220?

Post by TAT2 »

Is there something else that fits between the pipe and cylinder other than an o ring?

T
Post Reply