pLease help
-
- Member
- Posts: 54
- Joined: 10:25 pm Nov 14 2013
- Country:
pLease help
Rubber oil fill plug twisted off what's best way to get the rest out. I'd prefer to not take my bike apart
Living the good life :)
-
- Supporting Member I
- Posts: 567
- Joined: 10:38 am Aug 20 2012
- Country:
- Location: anderson sc
Re: pLease help
I drilled a small hole in mine and stuck a flat headed screw driver in. And backed it out
- diymirage
- Supporting Member II
- Posts: 2909
- Joined: 05:00 pm Sep 19 2011
- Country:
- Location: michigan
Re: pLease help
no experience with rubber, but I would try getting a pick in there, as for of center as possible and try to "unscrew" it that way
the real issue will be how tight it is on there.
worst case scenario you get yourself a knife or a dremel and cut it out in pieces
the real issue will be how tight it is on there.
worst case scenario you get yourself a knife or a dremel and cut it out in pieces
newbbewb wrote:DIYmirage has it right.
-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
- Sullyfam
- Gold Member
- Posts: 459
- Joined: 12:19 am Dec 10 2013
- Country:
- Location: Fort Worth, tx
Re: pLease help
I would either use a Dremel or razor blade and cut a slot in the middle and then use the widest standard screw driver to unscrew it. If using a Dremel be careful not to cut the side of the cover.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Sullyfam
- Gold Member
- Posts: 459
- Joined: 12:19 am Dec 10 2013
- Country:
- Location: Fort Worth, tx
Re: pLease help
+1 for royadams suggestion.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: pLease help
dremel, then penny, nickel, etc. and some PLARS
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
- diymirage
- Supporting Member II
- Posts: 2909
- Joined: 05:00 pm Sep 19 2011
- Country:
- Location: michigan
Re: pLease help
a nickel, sounds like it could get expensiveJason wrote:dremel, then penny, nickel, etc. and some PLARS
newbbewb wrote:DIYmirage has it right.
-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
- ICRage42
- Supporting Member
- Posts: 598
- Joined: 07:24 am Jan 09 2013
- Country:
- Location: Kawasaki, Ninja Ohio
pLease help
^^
I was gonna throw a jab at that but told myself to be nice and you did it anyway rofl.
I was gonna throw a jab at that but told myself to be nice and you did it anyway rofl.
If you cant fix it with a hammer, you have an electrical problem.
- diymirage
- Supporting Member II
- Posts: 2909
- Joined: 05:00 pm Sep 19 2011
- Country:
- Location: michigan
Re: pLease help
not sure how I ended up with a reputation of being a cheapskate but I figured I might as well play it
newbbewb wrote:DIYmirage has it right.
-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike