Trying to replace rear wheel bearings. The ends of the circlip broke off. The rest of the clip is still in there with nowhere to grab onto it.
What to do?
Damn the previous owner! [emoji35]
Wheel bearing circlip broke
-
- Member
- Posts: 133
- Joined: 06:38 pm Oct 12 2013
- Country:
- Location: Moore, OK
Wheel bearing circlip broke
2002 KDX 220R
2003 KLR 650
2003 KLR 650
- bufftester
- Platinum Member
- Posts: 3461
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: Wheel bearing circlip broke
Use a small flat screwdriver to hold one end of the circlip from spinning, and a second one (or a small pick) to try and pry out the other end. The other option would be to put a cutting wheel on the dremel and cut it at the mid point, but I'd work the pick and screwdriver first.
Looks about time for a new rear sprocket soon as well.
Looks about time for a new rear sprocket soon as well.
- IDRIDR
- Gold Member
- Posts: 207
- Joined: 04:36 pm Mar 03 2014
- Country: USA
- Location: Boise, Idaho
Re: Wheel bearing circlip broke
You may need to get creative grinding and bending on a sacrificial screwdriver or two. Perhaps some dental pics.
Just don't beat on the bearings from the other side not realizing there's a circlip there, busting up the hub like we did to a KLR wheel once.
Doh
Just don't beat on the bearings from the other side not realizing there's a circlip there, busting up the hub like we did to a KLR wheel once.
Doh
2003 KDX 220. RB Carb & Head Mods. Desert pipe. She's a runner!
2006 KLX 250 w/351 big bore. A well-sorted dual sporter.
2006 KLR 650. Mostly stock.
2014 Suzuki DL1000.
2006 KLX 250 w/351 big bore. A well-sorted dual sporter.
2006 KLR 650. Mostly stock.
2014 Suzuki DL1000.
- Sullyfam
- Gold Member
- Posts: 459
- Joined: 12:19 am Dec 10 2013
- Country:
- Location: Fort Worth, tx
Re: Wheel bearing circlip broke
+1 on bufftester's recommendation. Since you don't need the bearing you could drill a hole in it and use the drill bit as a stop so all you have to do is work the clip at one end without holding it in place. I would avoid using a cutting wheel if possible. Agree a sprocket and new chain are in order [emoji51]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Member
- Posts: 133
- Joined: 06:38 pm Oct 12 2013
- Country:
- Location: Moore, OK
Re: Wheel bearing circlip broke
Thanks. New sprockets and chain were delivered earlier this week.
Hopefully this dang circlip will come out. I'm struggling with the bearing on the other side as well. Might need some heat on it.
Hopefully this dang circlip will come out. I'm struggling with the bearing on the other side as well. Might need some heat on it.
2002 KDX 220R
2003 KLR 650
2003 KLR 650
- Sullyfam
- Gold Member
- Posts: 459
- Joined: 12:19 am Dec 10 2013
- Country:
- Location: Fort Worth, tx
Re: Wheel bearing circlip broke
Heat will help. Take your time as you don't want to score the inside. You will get it!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Member
- Posts: 133
- Joined: 06:38 pm Oct 12 2013
- Country:
- Location: Moore, OK
Re: Wheel bearing circlip broke
Bearings and the snap ring are out.
Do you really need that snap ring? Seems pointless since the bearing is pressed in.
Do you really need that snap ring? Seems pointless since the bearing is pressed in.
2002 KDX 220R
2003 KLR 650
2003 KLR 650
- Sullyfam
- Gold Member
- Posts: 459
- Joined: 12:19 am Dec 10 2013
- Country:
- Location: Fort Worth, tx
Re: Wheel bearing circlip broke
Glad you got it out. I would not run without it. I won't pretend to fully understand the forces at play when riding; however, I suspect the engineers that called for the snap ring there do! Plus, the risk versus reward seems a bit askew. Of it works great! If not, then you will likely need to buy a new hub. I'd rather buy the snap ring.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Member
- Posts: 133
- Joined: 06:38 pm Oct 12 2013
- Country:
- Location: Moore, OK
Re: Wheel bearing circlip broke
Just for reference and follow up for anyone who ends up needing a new clip.
Went to Ace Hardware. Got a 1 5/8" internal snap ring. It fit, but it fits tight.
Went to Ace Hardware. Got a 1 5/8" internal snap ring. It fit, but it fits tight.
2002 KDX 220R
2003 KLR 650
2003 KLR 650