Page 1 of 1
carb hose routing
Posted: 01:43 pm Sep 13 2014
by iswenson
Hello guys
stripped my KDX and rebuilt everything. finishing touches are in progress. I forgot to take pictures of the hoses that are connected to the carb. Does anyone have information on this? Pictures / sketch / etc?
thanks
Re: carb hose routing
Posted: 02:09 pm Sep 13 2014
by newbbewb
The two on the sides of the carb as well as the one on the float bowl go down through a metal clip that hangs off the back of the engine, then from there down to underneath the bike by the shock.
carb hose routing
Posted: 04:18 pm Sep 14 2014
by iswenson
OK thanks I thought that was it.
What about the crank breather hose...is that supposed to connect to the airbox or somewhere on the carb??
Re: carb hose routing
Posted: 01:01 am Sep 15 2014
by newbbewb
I always run mine down the same way on all my bikes. just don't turn the bike off and let it cool in deep water, or it will/could suck water into the transmission
carb hose routing
Posted: 11:57 am Sep 15 2014
by Slick_Nick
The crank breather hose runs up to the little "hoop" on the left side of the air box.
carb hose routing
Posted: 06:51 pm Sep 15 2014
by iswenson
OK that's what that hoop is for!
I have had some road bikes where the crank breather(s) hook into either the carb or the airbox for emissions BS.
thanks again guys!