carb hose routing

Got questions? We got answers....
Post Reply
iswenson
Member
Posts: 58
Joined: 01:23 pm May 04 2014
Country:

carb hose routing

Post by iswenson »

Hello guys

stripped my KDX and rebuilt everything. finishing touches are in progress. I forgot to take pictures of the hoses that are connected to the carb. Does anyone have information on this? Pictures / sketch / etc?

thanks
newbbewb
Supporting Member II
Supporting Member II
Posts: 579
Joined: 12:20 am Jan 22 2012
Country:
Location: sw washington state

Re: carb hose routing

Post by newbbewb »

The two on the sides of the carb as well as the one on the float bowl go down through a metal clip that hangs off the back of the engine, then from there down to underneath the bike by the shock.
93 kdx200-Highly modified
89 kx125/kdx200E engine
Buelldustin@gmail.com
iswenson
Member
Posts: 58
Joined: 01:23 pm May 04 2014
Country:

carb hose routing

Post by iswenson »

OK thanks I thought that was it.

What about the crank breather hose...is that supposed to connect to the airbox or somewhere on the carb??
newbbewb
Supporting Member II
Supporting Member II
Posts: 579
Joined: 12:20 am Jan 22 2012
Country:
Location: sw washington state

Re: carb hose routing

Post by newbbewb »

I always run mine down the same way on all my bikes. just don't turn the bike off and let it cool in deep water, or it will/could suck water into the transmission
93 kdx200-Highly modified
89 kx125/kdx200E engine
Buelldustin@gmail.com
User avatar
Slick_Nick
Supporting Member
Posts: 1675
Joined: 10:06 pm Oct 22 2009
Country: Canada
Location: Calgary, Alberta
Contact:

carb hose routing

Post by Slick_Nick »

The crank breather hose runs up to the little "hoop" on the left side of the air box.
'00 KDX 220R
iswenson
Member
Posts: 58
Joined: 01:23 pm May 04 2014
Country:

carb hose routing

Post by iswenson »

OK that's what that hoop is for!

I have had some road bikes where the crank breather(s) hook into either the carb or the airbox for emissions BS.

thanks again guys!
Post Reply