KDX electirical issue query

Got questions? We got answers....
Post Reply
Little Jerry
Member
Posts: 13
Joined: 05:56 pm Jun 14 2014
Country:

KDX electirical issue query

Post by Little Jerry »

Hi

Bought a KDX 250 recently and all the lights worked fine.

Now a few weeks later, the bike still runs fine, but the lights (both front and rear) don't work (intermittedly come on). All I have done is pull the seat and tank off.

I'm not great with electrics, assuming its a loose connection (cannot see anything obvious).

Any ideas on where to focus on if both front and rear lights are out? Is there any known problem spots with the KDX's

Appreciate any advice

Adam
User avatar
diymirage
Supporting Member II
Supporting Member II
Posts: 2909
Joined: 05:00 pm Sep 19 2011
Country:
Location: michigan

Re: KDX electirical issue query

Post by diymirage »

Hi Adam (or Jerry)
not a whole lot of experience with the 250 here but if the wiring is anything like the 200s it has to be dead simple
if it were my bike I would start at the flywheel cover and check the connection on 3 wires coming out of there

maybe even buy a little tube of dielectric grease and put a dab on each connection as you go
newbbewb wrote:DIYmirage has it right.


-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
Post Reply