The transmission oil fill cap to my 93 KDX200 is broken off the threads, thus there's a threaded piece of rubber stuck in the transmission oil fill threads. This makes it hard to get new oil into the transmission.
Useful suggestions appreciated--and here's one thing I tried:
1. I drilled three holes in the broken off cap and used three screws to attach the cap onto the rubber body. With a pliers and by hand, it still wouldn't budge, just gradually pulled the screws out of the rubber...
Thanks,
Paul
Broken transmission filler cap--How to remove?
-
- Member
- Posts: 1
- Joined: 07:10 pm May 11 2014
- Country:
- Gotanubike
- Supporting Member III
- Posts: 898
- Joined: 01:00 pm May 22 2013
- Country:
- Location: Ontario, Can
Broken transmission filler cap--How to remove?
This happened to me last year. Tap a sharpened wood chizzle into it and loosen
1990 KDX200
Bike Profile -> http://www.kdxrider.net/forums/viewtopi ... 61#p136315
Suspension Overhaul(Shock+89-92 conventional forks) -> http://www.kdxrider.net/forums/viewtopi ... 15&t=15255
96'-98' RM125 Showa 49mm fork swap -> http://www.kdxrider.net/forums/viewtopi ... 04&t=16994
KDXrider world map! -> https://www.zeemaps.com/map?group=186158
Bike Profile -> http://www.kdxrider.net/forums/viewtopi ... 61#p136315
Suspension Overhaul(Shock+89-92 conventional forks) -> http://www.kdxrider.net/forums/viewtopi ... 15&t=15255
96'-98' RM125 Showa 49mm fork swap -> http://www.kdxrider.net/forums/viewtopi ... 04&t=16994
KDXrider world map! -> https://www.zeemaps.com/map?group=186158