Clutch adjustment ?

Got questions? We got answers....
Post Reply
KDXrider32
Member
Posts: 24
Joined: 10:25 am Mar 29 2014
Country:

Clutch adjustment ?

Post by KDXrider32 »

I have my clutch adjusted where the pinion is at the 90 degree mark and the cable is tight at the lever ! If the cable is too tight will it cause my clutch to slip or just ruin it ? :shock:
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Clutch adjustment ?

Post by bufftester »

There should be some play at the lever, I don't have my manual in front of me atm but IIRC its like 2 or 3 mm. Check your manual for proper adjustment. having it too tight can cause it to drag or slip under load
User avatar
Joshmcmillan
Supporting Member
Posts: 232
Joined: 09:02 am Aug 23 2013
Country:
Location: Australia

Re: Clutch adjustment ?

Post by Joshmcmillan »

I think 1-2cm play in the clutch lever is ok. Better than having it tight.
07' CR450X (Main Bike)
07' KX125 (Completed basket case rebuild, for sale)
88' KDX200 (Not sure yet, runs but with rattly top end)
91' CBR250RR
Old Bikes: 97' KDX200, 00' RM125, 85' XR350, 94' KDX200, 02' CR80, 82' XT250, 98' CT200
Fitterman24
Supporting Member II
Supporting Member II
Posts: 96
Joined: 10:28 am Jul 13 2013
Country:

Clutch adjustment ?

Post by Fitterman24 »

What's all this millimeter stuff ? :grin: I use the good 'ol 1/8" to 3/16" of free play at the lever. I know, I know....but if an 'Merican nickel slips betwixt the lever and the perch, before pulling on the cable, it seems to suit my bikes just fine. I have been known to be half a moron, tho
Post Reply