Possible lead on upgraded KIPS valves

Got questions? We got answers....
Post Reply
90SDKDX
Supporting Member
Posts: 181
Joined: 02:46 pm Aug 11 2012
Country:

Possible lead on upgraded KIPS valves

Post by 90SDKDX »

Well I was looking around on ebay today for kips parts and stumbled upon this company.

http://www.bdkraceeng.co.uk/KMX200.html

Looks like they are based out of the UK. They've got KIPS valves that they make for the KMX200 which I'm guessing is an overseas version of our bikes. Unfortunately the valves are certainly different looking from the top view. They show a picture of how the valves are situated and it looks like they've only got two valves in their cylinder, with no idler gear, and the holes are round cut with round top collars.

I shot them a quick email asking if they have or ever might make some for our KDX200's. Hopefully the answer would be nice. I just get the sinking feeling that in the years to come the valves will be extremely hard to come by. :supz:
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Possible lead on upgraded KIPS valves

Post by KDXGarage »

That looks similar to the KIPS style on 1986 - 1988 KDX200 (and '85 KX I think)
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
Gotanubike
Supporting Member III
Supporting Member III
Posts: 898
Joined: 01:00 pm May 22 2013
Country:
Location: Ontario, Can

Possible lead on upgraded KIPS valves

Post by Gotanubike »

Nice find though! Let us know what you hear from him
1990 KDX200
Bike Profile -> http://www.kdxrider.net/forums/viewtopi ... 61#p136315
Suspension Overhaul(Shock+89-92 conventional forks) -> http://www.kdxrider.net/forums/viewtopi ... 15&t=15255
96'-98' RM125 Showa 49mm fork swap -> http://www.kdxrider.net/forums/viewtopi ... 04&t=16994
KDXrider world map! -> https://www.zeemaps.com/map?group=186158
ecojbr
Supporting Member II
Supporting Member II
Posts: 239
Joined: 09:16 pm Aug 04 2010
Country:

Possible lead on upgraded KIPS valves

Post by ecojbr »

I see they have the kips spacer. That was big stuff in the 80's I just had to have one for my 125!!!!
04 kx220 hybrid
03 kx 250
05 kdx 200
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Possible lead on upgraded KIPS valves

Post by KDXGarage »

I saw that, too. VERY cool.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Dekon
Supporting Member II
Supporting Member II
Posts: 674
Joined: 07:54 am Jun 26 2012
Country:
Location: Rhode Island

Possible lead on upgraded KIPS valves

Post by Dekon »

Seems like it is based off of the KDX.

http://www.kdxrider.net/forums/viewtopic.php?t=5172
ecojbr
Supporting Member II
Supporting Member II
Posts: 239
Joined: 09:16 pm Aug 04 2010
Country:

Re: Possible lead on upgraded KIPS valves

Post by ecojbr »

I have thought about making a run of KIPS spacers, just not sure there real gain or if there was even a market
04 kx220 hybrid
03 kx 250
05 kdx 200
MCKDX220
Member
Posts: 109
Joined: 01:17 pm Apr 25 2013
Country: United States
Location: Roseville, CA

Re: Possible lead on upgraded KIPS valves

Post by MCKDX220 »

I did a bit of research and did not see anyone post any results, other than the dyno chart on the manufacturers web site.

It is certainly is intriging, who wouldn't like more bottom end on a 2 stroke, ever ridden a KTM 300 ???

It's like my KTM 520 E/XC, just with a LOT more vibration.

Michael
87 KDX200 / 02 KTM 520 EX/C / 87 XR 200 / 90 XR 200
ecojbr
Supporting Member II
Supporting Member II
Posts: 239
Joined: 09:16 pm Aug 04 2010
Country:

Re: Possible lead on upgraded KIPS valves

Post by ecojbr »

do some research on KX kips spacers. No real results. Now I can't really remember from 1987. But it was supposed to be the big ticket and I bought one. Been thinking about making some and trying it to see for myself, just never did
04 kx220 hybrid
03 kx 250
05 kdx 200
sarrant
Member
Posts: 463
Joined: 02:47 pm Aug 10 2012
Country: USA
Location: Sac, Ca

Re: Possible lead on upgraded KIPS valves

Post by sarrant »

Brock from BDK is actually a poster here at KDXRider.

He was in this thread:
http://kdxrider.net/forums/viewtopic.ph ... ps#p137272

So I am sure he has some insights.
frenche200
Supporting Member I
Supporting Member I
Posts: 245
Joined: 12:56 pm Oct 04 2013
Country:
Location: france

Possible lead on upgraded KIPS valves

Post by frenche200 »

Brock speack a little about 200 KDX here http://www.kawasakimotorcycle.org/forum ... ves-3.html , but nothing about central valve :( (if someone have one to sell i can be interested)
i'm French and I don't speak English very well, so, please, excuse me :)
90SDKDX
Supporting Member
Posts: 181
Joined: 02:46 pm Aug 11 2012
Country:

Re: Possible lead on upgraded KIPS valves

Post by 90SDKDX »

Alright here's a little update for everyone. Got an email back from Brock today with some good news and some bad news.
The bad:
They are not currently making any kips Valves for the kdx models. The reasoning for this being that they have not been discontinued by kawasaki. Once they've been discontinued and are in a higher demand they may consider producing them.
The good:
They do have a solution for the infamous left valve that seems to fail more often than the right side or the idler gear. Apparently you can use one of their KMX200 valves on the left with a couple modifications. I'm assuming you wouldn't be able to use it on the right since it shares the same space as the idler gear. Here's his word for word on what needs to be done to make it work on the left side:

KDX200 1989 E1 to 1994 E6
Left hand valve can be replaced with KMX200 kips valve with 1mm spacer below and
14.5mm deep by 20mm diam bush above with 6mm hole in center.
Valve must be fitted with dot one to the right of the mark as you look from valve towards rod.

I'm guessing the spacer needs to be circular and 1mm in thickness :hmm: . He says if I'd like them to they could make the bush to send out with the valve.

Also a side note he said that in the future it would be a good idea for someone to have a new set laying around that they can use to make replicas off once they're discontinued.
Post Reply