KDXRIDER.NET

Hello I have a 2000 kdx and was looking to put a newer looking front fender on it. Just wondering if anyone else has put one maybe off a new kx?

I use KX fenders on both my E and H bikes. I haven't had to drill or cut anything yet.

I just put a new front fender on my '97 220 that was for a KX250f/450f. I had to drill out the holes slightly for the KDX washers to fit. It looks mucho better. It is made by Acerbis and the color match is right on.

i'll agree with fiterman, i did the same on my 02 200. Mine is from a 2012 kx250f/450f. Just had to open the holes up a tiny bit and cram the spacer washers into the holes and it works just right. Mine is like this: http://www.mx1canada.com/images/P/Kaw_214169_Black.jpg

Ealier kx250/450f's are like this(not sure on the years? maybe pre 06?): http://thumbs1.ebaystatic.com/d/l225/m/ ... rtP0Pg.jpg

notice how the nose/front points are different. whichever you like better, both will bolt up pretty easily for ya