Different front fender
-
- Supporting Member
- Posts: 64
- Joined: 11:24 am May 06 2013
- Country:
Different front fender
Hello I have a 2000 kdx and was looking to put a newer looking front fender on it. Just wondering if anyone else has put one maybe off a new kx?
- 6 Riders
- Gold Member
- Posts: 2124
- Joined: 12:58 pm May 01 2013
- Country: USA
- Location: Washington
- Contact:
Re: Different front fender
I use KX fenders on both my E and H bikes. I haven't had to drill or cut anything yet.
newbbewb wrote:^what he said.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually typemasterblaster wrote:Man 6 riders you rock.
-
- Supporting Member II
- Posts: 96
- Joined: 10:28 am Jul 13 2013
- Country:
Different front fender
I just put a new front fender on my '97 220 that was for a KX250f/450f. I had to drill out the holes slightly for the KDX washers to fit. It looks mucho better. It is made by Acerbis and the color match is right on.
- Tyl3r
- Platinum Member
- Posts: 1336
- Joined: 06:51 pm Nov 26 2012
- Country: USA
- Location: SW Pennsylvania
Re: Different front fender
i'll agree with fiterman, i did the same on my 02 200. Mine is from a 2012 kx250f/450f. Just had to open the holes up a tiny bit and cram the spacer washers into the holes and it works just right. Mine is like this: http://www.mx1canada.com/images/P/Kaw_214169_Black.jpg
Ealier kx250/450f's are like this(not sure on the years? maybe pre 06?): http://thumbs1.ebaystatic.com/d/l225/m/ ... rtP0Pg.jpg
notice how the nose/front points are different. whichever you like better, both will bolt up pretty easily for ya
Ealier kx250/450f's are like this(not sure on the years? maybe pre 06?): http://thumbs1.ebaystatic.com/d/l225/m/ ... rtP0Pg.jpg
notice how the nose/front points are different. whichever you like better, both will bolt up pretty easily for ya
05 KX220 Hybrid all decked out