KDXRIDER.NET

While rebuilding, I need a new rear rotor since the one on there was shot. What other models (KX, KLX?) will fit the KDX wheel? Furthermore, what other parts in general are interchangeable? Thanks!

Got to know what year it is......
If E series rotors are cross compatible with H series that would be great, but KX rotors are out, they will not cross over at all.

Keep forgetting! H-series 200.

I thought there was a tread on here not to long ago where KX rotors could be used but the mounting holes had to be reamed a little.

Here it is: http://kdxrider.net/forums/viewtopic.ph ... rs#p132243

AH, but you can get E series rotors for 1/2 the price, so just knowing if they are cross compatible, somehow I think that they are....since the wheels just swap over, then who cares if you can use a KX rotor?

6 Riders wrote:AH, but you can get E series rotors for 1/2 the price, so just knowing if they are cross compatible, somehow I think that they are....since the wheels just swap over, then who cares if you can use a KX rotor?

Exactly--we're going budget here. I'd love a list of any or all direct fits onto an H-series hub. Or any other parts that are interchangeable. I know when I had my CRF 230, I was able to graft a complete XR250 front end on by just using a few washers.

For rear rotor, H (all years) A (all years), KLX300 (all years) and KDX250-D1-4 (91-94) are interchangeable directly.

Not sure about the E models...they are interchangeable with KX500 (all years), and the K and L model KX125/250s. Seems I remember reading somewhere they didn't fit the H/A's without reaming them as stated in the post above

bufftester wrote:For rear rotor, H (all years) A (all years), KLX300 (all years) and KDX250-D1-4 (91-94) are interchangeable directly.

Not sure about the E models...they are interchangeable with KX500 (all years), and the K and L model KX125/250s. Seems I remember reading somewhere they didn't fit the H/A's without reaming them as stated in the post above

That's what I was looking for! Thanks!