Rotor Compatibility

Got questions? We got answers....
Post Reply
User avatar
Mayor Brap Brap
Supporting Member
Posts: 266
Joined: 07:33 am Nov 02 2013
Country:
Location: Maine

Rotor Compatibility

Post by Mayor Brap Brap »

While rebuilding, I need a new rear rotor since the one on there was shot. What other models (KX, KLX?) will fit the KDX wheel? Furthermore, what other parts in general are interchangeable? Thanks!
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: Rotor Compatibility

Post by 6 Riders »

Got to know what year it is......
If E series rotors are cross compatible with H series that would be great, but KX rotors are out, they will not cross over at all.
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
User avatar
Mayor Brap Brap
Supporting Member
Posts: 266
Joined: 07:33 am Nov 02 2013
Country:
Location: Maine

Re: Rotor Compatibility

Post by Mayor Brap Brap »

Keep forgetting! H-series 200.
Dekon
Supporting Member II
Supporting Member II
Posts: 674
Joined: 07:54 am Jun 26 2012
Country:
Location: Rhode Island

Re: Rotor Compatibility

Post by Dekon »

I thought there was a tread on here not to long ago where KX rotors could be used but the mounting holes had to be reamed a little.
Dekon
Supporting Member II
Supporting Member II
Posts: 674
Joined: 07:54 am Jun 26 2012
Country:
Location: Rhode Island

Re: Rotor Compatibility

Post by Dekon »

User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: Rotor Compatibility

Post by 6 Riders »

AH, but you can get E series rotors for 1/2 the price, so just knowing if they are cross compatible, somehow I think that they are....since the wheels just swap over, then who cares if you can use a KX rotor?
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
User avatar
Mayor Brap Brap
Supporting Member
Posts: 266
Joined: 07:33 am Nov 02 2013
Country:
Location: Maine

Re: Rotor Compatibility

Post by Mayor Brap Brap »

6 Riders wrote:AH, but you can get E series rotors for 1/2 the price, so just knowing if they are cross compatible, somehow I think that they are....since the wheels just swap over, then who cares if you can use a KX rotor?
Exactly--we're going budget here. I'd love a list of any or all direct fits onto an H-series hub. Or any other parts that are interchangeable. I know when I had my CRF 230, I was able to graft a complete XR250 front end on by just using a few washers.
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Rotor Compatibility

Post by bufftester »

For rear rotor, H (all years) A (all years), KLX300 (all years) and KDX250-D1-4 (91-94) are interchangeable directly.

Not sure about the E models...they are interchangeable with KX500 (all years), and the K and L model KX125/250s. Seems I remember reading somewhere they didn't fit the H/A's without reaming them as stated in the post above
User avatar
Mayor Brap Brap
Supporting Member
Posts: 266
Joined: 07:33 am Nov 02 2013
Country:
Location: Maine

Re: Rotor Compatibility

Post by Mayor Brap Brap »

bufftester wrote:For rear rotor, H (all years) A (all years), KLX300 (all years) and KDX250-D1-4 (91-94) are interchangeable directly.

Not sure about the E models...they are interchangeable with KX500 (all years), and the K and L model KX125/250s. Seems I remember reading somewhere they didn't fit the H/A's without reaming them as stated in the post above
That's what I was looking for! Thanks! :supz:
Post Reply