HELP: KLX fork swap question

Got questions? We got answers....
Post Reply
Comp721
Member
Posts: 7
Joined: 11:24 am Mar 18 2013
Country:

HELP: KLX fork swap question

Post by Comp721 »

So I just got done putting some KLX 300 forks on my DX and everything is great except there is a little bit of "wiggle room" on my front wheel. As in it can be pushed side to side. Can anyone shed some light on what may be wrong? TIA
User avatar
KDXohio
Supporting Member
Posts: 825
Joined: 06:04 pm Jun 19 2013
Country: United States
Location: Dayton, Ohio

Re: HELP: KLX fork swap question

Post by KDXohio »

Check that the axle but is fully seated with the holders loose
1990 KDX200 FMF Fatty, Answer VFC silencer, VForce 3 Cage, Wiseco Piston, KX125-J series KYB USD fork conversion, Race tech goldvalves, J series front brake assembly, air-box snorkel removed, Acerbis Headlight, KX450F Front fender, Pro Taper RM bend bars, ASV front Brake lever, MSR Clutch perch and lever, RB Head mod, 36mm PWK carb, Trail Tech Kickstand.
zepplin153
Member
Posts: 137
Joined: 11:48 am Mar 13 2012
Country:
Location: middle tennessee

Re: HELP: KLX fork swap question

Post by zepplin153 »

Its ruined! I guess you will have to dispose of the bike. I can take care of it for you :lol:

Kidding. just check you have all the axle stuff in there correctly. there are some spacers that go in between the fork end and the axle. check a parts diagram (tons available, but easy to find on thumpertalk.com). could also be your bearings, doubt it but just check.
'98 KDX 200 (KLX300 Forks)
Post Reply