98 KDX 220 - Rear Shock Overhaul

Got questions? We got answers....
Post Reply
Byte
Member
Posts: 235
Joined: 04:47 pm Mar 19 2009
Country:

98 KDX 220 - Rear Shock Overhaul

Post by Byte »

Hi all.

I have my shock apart ready for overhaul.

i see the complete list of parts from racetech used to overhaul the shock, but what are must have parts to be replaced and what are just nice to have?

what shim profile change is recommended?

is the stock spring for a 180lb rider and what is the stock spring for the 98 model?

what rated spring do i get for 215lb rider and where should i get this spring?

what would this spring be suited for (rider weight without gear)?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0693220516


Byte
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: 98 KDX 220 - Rear Shock Overhaul

Post by Julien D »

Well hello, Byte! Been a while since you've posted here. Getting tired of TT? lol...

There is a great spring rate calculator at Racetech, which will tell you what is recommended for your weight. I believe the stock spring is a 5.0kg. Should be good up to about 210lbs. You could replace with a 5.2, but it's probably not necessary. As for rebuild bits, I will let someone else speak up. Shock rebuild is something I have not tackled myself.
Image
Byte
Member
Posts: 235
Joined: 04:47 pm Mar 19 2009
Country:

98 KDX 220 - Rear Shock Overhaul

Post by Byte »

thanks julien.

yes, still floating around with the trusty kdx and basically overhauling the whole bike because i love it so much.

good to see this site still going on.... :-)

can i then ask you what brand of spring you like better - eibach of racetech?


byte
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: 98 KDX 220 - Rear Shock Overhaul

Post by Julien D »

Either one will suit you just fine. If you're set on the 5.2, just look for the best deal you can find.

Sent from my HTC6435LVW using Tapatalk 4
Image
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 98 KDX 220 - Rear Shock Overhaul

Post by KDXGarage »

Terry Hay used to be a Race Tech dealer in AUS. Contact him.

I am pretty sure you need a 5.2 or so.

Just remember to have the correct rate in front too to keep it all balanced.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Byte
Member
Posts: 235
Joined: 04:47 pm Mar 19 2009
Country:

98 KDX 220 - Rear Shock Overhaul

Post by Byte »

thanks boys
Byte
Member
Posts: 235
Joined: 04:47 pm Mar 19 2009
Country:

98 KDX 220 - Rear Shock Overhaul

Post by Byte »

does the stock shim profile suffice or can it be tweaked for better performance?

byte
Post Reply