What's it worth?
Posted: 04:13 pm Jul 20 2013
I rode it once last summer, not at all this summer. Hard to find people to ride with! I've put more time into the mods than I did riding it. It's a nice, maintained bike(I relubed all the bearings that I could find), adult ridden by a very amateur rider:), casual woods riding. Unless my 9 and 11 yr old boys show interest in riding(would make a great chaser bike), I'm considering selling my beloved bike. The bike was nice when I got it. All stock except head light and the exhaust.
SO WHAT'S IT WORTH?
2004 KDX 200
-DynaRing Auto Clutch($300)
- V-Force III Reeds
-RB carb mod with hand mixture screw and float bowl allen screw kit
-RB Head mod
-Inverted Forks
-03' KX 125 inverted forks
-BRP upper triple clamp
-forks revalved and sprung by MX Tech, 220 lbs rider($550)
-RB stem swap and spacer
-rear spring(black) for 220 lb. rider
-FMF torque pipe, FMF turbine core II silencer
-E-Line carbon fiber pipe guard
-Probend bar guards that connect to triple clamps
-Protaper oversized bars
-Tires have excellent tread(maybe four rides on them)
- Service Manual, major receipts, manuals for auto clutch, fork tuning
-I have all the original parts, forks, front wheel, extra head etc., I don't have an original carb or exhaust.
-head light needs rewiring at the bulbs, the clamp at the light switch is broke.
-I have some small extras to go along with the bike since I would be giving up riding altogether.
Some other Items I may sell separately are.
-extra frame $?
-96' KX500 inverted forks with triple clamp, tubes scratch free. I think these are 43 mm. I think if I did my fork mod over I would have used these instead of the larger 02 KX 125 46 mm forks. I think these are a direct bolt on? I've got front wheel also but not sure if it is the KX 500 or the 125 wheel. When I was doing my front forks I was finding many of the parts were compatible and used what I thought was looked best. What can I get for the forks?
SO WHAT'S IT WORTH?
2004 KDX 200
-DynaRing Auto Clutch($300)
- V-Force III Reeds
-RB carb mod with hand mixture screw and float bowl allen screw kit
-RB Head mod
-Inverted Forks
-03' KX 125 inverted forks
-BRP upper triple clamp
-forks revalved and sprung by MX Tech, 220 lbs rider($550)
-RB stem swap and spacer
-rear spring(black) for 220 lb. rider
-FMF torque pipe, FMF turbine core II silencer
-E-Line carbon fiber pipe guard
-Probend bar guards that connect to triple clamps
-Protaper oversized bars
-Tires have excellent tread(maybe four rides on them)
- Service Manual, major receipts, manuals for auto clutch, fork tuning
-I have all the original parts, forks, front wheel, extra head etc., I don't have an original carb or exhaust.
-head light needs rewiring at the bulbs, the clamp at the light switch is broke.
-I have some small extras to go along with the bike since I would be giving up riding altogether.
Some other Items I may sell separately are.
-extra frame $?
-96' KX500 inverted forks with triple clamp, tubes scratch free. I think these are 43 mm. I think if I did my fork mod over I would have used these instead of the larger 02 KX 125 46 mm forks. I think these are a direct bolt on? I've got front wheel also but not sure if it is the KX 500 or the 125 wheel. When I was doing my front forks I was finding many of the parts were compatible and used what I thought was looked best. What can I get for the forks?