My compression test results school me please
-
- Member
- Posts: 68
- Joined: 08:29 pm Jun 16 2013
- Country:
My compression test results school me please
So I did a compression test first kick the gauge read 90 after four to five kicks it read 150-160 how do I go about these readings should it hit 150 with a certain amount of kicks?
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: My compression test results school me please
throttle fully open, kick several times to get it at its high reading
Thank you for participating on kdxrider.net. ![Clap :bravo:](./images/smilies/eusa_clap.gif)
To post pictures from a device: viewtopic.php?f=88&t=24128
![Clap :bravo:](./images/smilies/eusa_clap.gif)
To post pictures from a device: viewtopic.php?f=88&t=24128
- diymirage
- Supporting Member II
- Posts: 2909
- Joined: 05:00 pm Sep 19 2011
- Country:
- Location: michigan
Re: My compression test results school me please
so in short getting up to 160 with 5 kicks is well within the usable range...right?
newbbewb wrote:DIYmirage has it right.
-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
-
- Member
- Posts: 68
- Joined: 08:29 pm Jun 16 2013
- Country:
My compression test results school me please
That's what confuses me should it reach a certain number with a certain number of kicks or just until the needle stops climbing. The manual said between 90 and 152 so is 60-65 to high? I just need some insight on how it works
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: My compression test results school me please
Kick till it stops going up. 60 - 65 would be wicked low. 160 or 165 would be on the high side, but that's fine as long as it's not pinging.
![Image](./images/logo2.gif)
-
- Member
- Posts: 68
- Joined: 08:29 pm Jun 16 2013
- Country:
My compression test results school me please
ok i checked again and its around 170 is this alright? and what is pinging
- bufftester
- Platinum Member
- Posts: 3461
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: My compression test results school me please
170 is way up the high side, has the engine been apart and had any work on it? Pinging (or detonation) can be caused by high compression ratios which cause combustion to occur early (among many other things), and is a distinct metallic pinging sound.
From the manual:
From the manual:
Kick the kick starter until the needle on the gauge stops rising and compare your reading with specification.
(Specification for compression pressure check is 90 to 151 psi)
A low reading is a possible indication of a damaged piston and/or piston rings, leaking base or head gasket or a worn-out cylinder.
-
- Member
- Posts: 68
- Joined: 08:29 pm Jun 16 2013
- Country:
My compression test results school me please
what could cause such high compression?
- Postigo
- Gold Member
- Posts: 372
- Joined: 10:09 pm Aug 12 2012
- Country:
- Location: Puerto Rico
- Contact:
Re: My compression test results school me please
Carbon buildup in the cylinder and piston or maybe some modification to the cylinder head like an RB mod for race gas.
The Doctor says I have multiple personality desorder... But we are not agree...
-
- Supporting Member III
- Posts: 1484
- Joined: 02:26 pm Jun 29 2005
- Country:
- Location: Alabama
Re: My compression test results school me please
How does it run? The other day you were all set to take it apart. I wouldn't, it sounds fine. Most gauges can be 3-5% of full scale off when brand new, so a 200 psi gauge may be +/- 10 psi. That is extreme, but it could easily be off 5 psi and the KDX motor is kind of low compression anyway. The worst that can happen is pinging at high RPM, if you hear funny stuff at WOT, back off.
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
-
- Member
- Posts: 68
- Joined: 08:29 pm Jun 16 2013
- Country:
Re: My compression test results school me please
she runs fine and dont hear any strange sounds if it could be 5 psi off i think the reading would be closer to 60
-
- Member
- Posts: 222
- Joined: 08:51 am May 30 2012
- Country:
Re: My compression test results school me please
In my E series manual it says the usable compression range is 119-185 psi so I would say 160-170 isn't too high, it sounds just about right.
After the break in on my full rebuild I was getting 180-190 psi with no pinging on 93 octane.
Just run premium and don't worry about it.
After the break in on my full rebuild I was getting 180-190 psi with no pinging on 93 octane.
Just run premium and don't worry about it.
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
My compression test results school me please
If your that worried about it you could leave the air filter out for a few rides. That will get the compression back down. ![Laugh :lol:](./images/smilies/b_grind1.gif)
![Laugh :lol:](./images/smilies/b_grind1.gif)
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: My compression test results school me please
LOL! ![Partyman :partyman:](./images/smilies/icon_pidu.gif)
![Partyman :partyman:](./images/smilies/icon_pidu.gif)
Thank you for participating on kdxrider.net. ![Clap :bravo:](./images/smilies/eusa_clap.gif)
To post pictures from a device: viewtopic.php?f=88&t=24128
![Clap :bravo:](./images/smilies/eusa_clap.gif)
To post pictures from a device: viewtopic.php?f=88&t=24128