airstriker question
Posted: 11:27 am Apr 28 2013
I am trying to get my jetting dialed in on my kdx 250 hybrid.with the original carb I ran a 35 pilot 155 main cgl needle in second from top # 6 slide. When I built my hybrid I used the rm's updated carb. In it I have 35 pilot 155 main n1ef needle in top and # 8 slide. The bike is much better down low now. But I can't seem to get rid of a mid throttle choppy feel. The bike does fine until It catches with the load then gets choppy until i give it a little more throttle. It feels good on a normal ride its only when cruising mid throttle you notice it. I've tried a n1ee and n1ef needle neither seems to have much affect. Anyone have any idea where i should go. Leaner or richer needle or maybe a single taper needle. Thanks