Need help to find a part

Got questions? We got answers....
Post Reply
knowledge seeker
Member
Posts: 50
Joined: 06:56 am Mar 27 2009
Country:
Location: Puerto Rico

Need help to find a part

Post by knowledge seeker »

I've searched on the web for a crankshaft kit which would include the crank with the connecting rod assembled, bearings, and gaskets but can't seem to find it. I also need advice on what brand of piston to get hopefully as a kit with gaskets, etc. Any help will be greatly appreciated.

Roger
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: Need help to find a part

Post by Julien D »

Nobody ever produced a complete replacement crank assembly for the KDX. You'll need to purchase a connecting rod kit and have yours rebuilt. For top end, If you have a 200 you have the option of ProX or Wiseco. If you have a 220, it is highly recommended to use forged only, which is Wiseco. Wiseco's top end kit is quite nice, and comes with everything you will need. I'm not sure what other brands may be available in your area, if any.
Image
knowledge seeker
Member
Posts: 50
Joined: 06:56 am Mar 27 2009
Country:
Location: Puerto Rico

Need help to find a part

Post by knowledge seeker »

Thanks a lot for the info!
User avatar
CoronasAndChips
Supporting Member I
Supporting Member I
Posts: 227
Joined: 12:55 pm May 18 2012
Country:
Location: Kalkaska, Mi

Re: Need help to find a part

Post by CoronasAndChips »

Elbow grease contains no trans fat!
CoronasAndChips on XBox Live
BFBC2, BF3, COD 2,3,4, Black Ops, Red Dead Redemption, Tiger Woods 08' and 09' and Forza 2..... mostly
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: Need help to find a part

Post by Julien D »

Buying OEM is a pricey option. Generally a rod kit will be under $100 USD, and figure an hour of shop time to press it in. $60 in my area, will vary shop to shop. You have to buy the gasket set and bearing kit either way, so rebuilding your crank rather than buying new will save you a couple hundred.
Image
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Need help to find a part

Post by KDXGarage »

Yep. There is no aftermarket crankshaft.

Is yours damaged or just needing to be rebuilt due to wear over time???
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
knowledge seeker
Member
Posts: 50
Joined: 06:56 am Mar 27 2009
Country:
Location: Puerto Rico

Re: Need help to find a part

Post by knowledge seeker »

The thing is I don't have a reliable place locally. Can you guys suggest some where I can ship the crank & have this done?. Thanks all for your help.
Roadhazardguy
Supporting Member II
Supporting Member II
Posts: 302
Joined: 09:18 pm Aug 13 2012
Country:
Location: Canyon Lake Tx

Re: Need help to find a part

Post by Roadhazardguy »

Andrew Cooksey here in Texas or Ron Black up north are both good.
Tony
1988 KDX 200
1980 KD 80
1989 ATK 406
1984 RM 500
1980 KZ 1300
2008 SM450R
knowledge seeker
Member
Posts: 50
Joined: 06:56 am Mar 27 2009
Country:
Location: Puerto Rico

Re: Need help to find a part

Post by knowledge seeker »

Thanks!
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Need help to find a part

Post by bufftester »

You may want to check about Cooksey, looks like he is transitioning to just KTMs starting this month.
Roadhazardguy
Supporting Member II
Supporting Member II
Posts: 302
Joined: 09:18 pm Aug 13 2012
Country:
Location: Canyon Lake Tx

Re: Need help to find a part

Post by Roadhazardguy »

Utt oh, I guess I should have sent mine to him a little sooner. Oh well RB is cheaper anyway.
Tony
1988 KDX 200
1980 KD 80
1989 ATK 406
1984 RM 500
1980 KZ 1300
2008 SM450R
Post Reply