Scotts mount used on 05 KDX with 02 KX fork conversion
- TWMOODY
- Gold Member
- Posts: 752
- Joined: 08:10 pm Dec 01 2006
- Country:
- Location: Southeast , Michigan
Scotts mount used on 05 KDX with 02 KX fork conversion
I know somewhere on here is a thread about what mount was used to mount a Scotts damper on a H model KDX with a KX fork conversion. Vince had this set up on his bike. Anyone familiar with this ?
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
Scotts mount used on 05 KDX with 02 KX fork conversion
I remember the thread and I think Vince said that he had the Scotts on the bike before the fork swap and he was able to reuse everything after the fork swap. I think.
*EDIT*
Check this, http://kdxrider.net/forums/viewtopic.ph ... ods#p27312
*EDIT*
Check this, http://kdxrider.net/forums/viewtopic.ph ... ods#p27312
- B737driver
- Gold Member
- Posts: 491
- Joined: 01:11 pm Dec 02 2011
- Country:
- Location: Heath, Texas
Re: Scotts mount used on 05 KDX with 02 KX fork conversion
Here is another thread.http://kdxrider.net/forums/viewtopic.php?f=77&t=12615
Live to Fly
Fly to Live
Fly to Live
- B737driver
- Gold Member
- Posts: 491
- Joined: 01:11 pm Dec 02 2011
- Country:
- Location: Heath, Texas
Re: Scotts mount used on 05 KDX with 02 KX fork conversion
And another http://kdxrider.net/forums/viewtopic.php?f=77&t=12235
That's my setup...KDX tower (clamp on), Scott's upper T-Clamp. Works great.
That's my setup...KDX tower (clamp on), Scott's upper T-Clamp. Works great.
Live to Fly
Fly to Live
Fly to Live
- TWMOODY
- Gold Member
- Posts: 752
- Joined: 08:10 pm Dec 01 2006
- Country:
- Location: Southeast , Michigan
Re: Scotts mount used on 05 KDX with 02 KX fork conversion
Thanks Guys !
I have the full sub mount set up for my KX450F that I plane on putting on the KDX.
I guess I will pull it down and see how everything lines up and what adjustments are
needed.
I have the full sub mount set up for my KX450F that I plane on putting on the KDX.
I guess I will pull it down and see how everything lines up and what adjustments are
needed.