KDXRIDER.NET

I searched JD and got nothing, JD Jetting got 107 pages of results and I don't want to go through that many pages.
Has anyone bought one of his kits?

I have his needles.

Browse in the jets and needles section here for a bit, you'll find a few people using JD's needles.

K D wrote:I searched JD and got nothing, JD Jetting got 107 pages of results and I don't want to go through that many pages.
Has anyone bought one of his kits?

I did.

Good needles!!

I made no sense out of his jetting recommendation, but the needle (red) runs great.

Thanks
I followed his instructions and the jetting is way off.

My results with JD jetting kit for the KDX are poor at best. Follow the instructions in the kit, and the bike won't run well. I imagine I could have moved the clip on the needle and played with it... but, thats why you pay the additional money for a pre tested kit. Right? I have had great luck using JD kits on other bikes and I am surprized, but would advise you not to waste your money on a jd kit for a KDX.

jeffsilver1 wrote:My results with JD jetting kit for the KDX are poor at best. Follow the instructions in the kit, and the bike won't run well. I imagine I could have moved the clip on the needle and played with it... but, thats why you pay the additional money for a pre tested kit. Right? I have had great luck using JD kits on other bikes and I am surprized, but would advise you not to waste your money on a jd kit for a KDX.

Any jetting recommendations are just a guess at best. To get the jetting right it needs to be done by you on your bike where you ride (temperature, elevation, ect.). You could have two of the same bikes with the same mods done to them and still need different jetting.