I searched JD and got nothing, JD Jetting got 107 pages of results and I don't want to go through that many pages.
Has anyone bought one of his kits?
JD Jetting
- Tedh98
- Supporting Member II
- Posts: 1576
- Joined: 01:08 pm Mar 20 2009
- Country:
- Location: Atlanta, Georgia
- Contact:
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: JD Jetting
Browse in the jets and needles section here for a bit, you'll find a few people using JD's needles.
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
JD Jetting
K D wrote:I searched JD and got nothing, JD Jetting got 107 pages of results and I don't want to go through that many pages.
Has anyone bought one of his kits?
I did.
Good needles!!
I made no sense out of his jetting recommendation, but the needle (red) runs great.
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!
-
- Member
- Posts: 20
- Joined: 10:38 pm Jan 02 2007
- Country:
- Location: The Fringe
Re: JD Jetting
Thanks
I followed his instructions and the jetting is way off.
I followed his instructions and the jetting is way off.
-
- Member
- Posts: 6
- Joined: 11:10 am Feb 03 2013
- Country:
JD Jetting
My results with JD jetting kit for the KDX are poor at best. Follow the instructions in the kit, and the bike won't run well. I imagine I could have moved the clip on the needle and played with it... but, thats why you pay the additional money for a pre tested kit. Right? I have had great luck using JD kits on other bikes and I am surprized, but would advise you not to waste your money on a jd kit for a KDX.
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
JD Jetting
Any jetting recommendations are just a guess at best. To get the jetting right it needs to be done by you on your bike where you ride (temperature, elevation, ect.). You could have two of the same bikes with the same mods done to them and still need different jetting.jeffsilver1 wrote:My results with JD jetting kit for the KDX are poor at best. Follow the instructions in the kit, and the bike won't run well. I imagine I could have moved the clip on the needle and played with it... but, thats why you pay the additional money for a pre tested kit. Right? I have had great luck using JD kits on other bikes and I am surprized, but would advise you not to waste your money on a jd kit for a KDX.