Shift Lever Adjustment

Got questions? We got answers....
Post Reply
mohawkman2
Member
Posts: 7
Joined: 05:45 pm Nov 21 2012
Country:

Shift Lever Adjustment

Post by mohawkman2 »

I have a 2005 KDX 200, is there any possible way to adjust the height of the stock shift lever.
User avatar
diymirage
Supporting Member II
Supporting Member II
Posts: 2909
Joined: 05:00 pm Sep 19 2011
Country:
Location: michigan

Re: Shift Lever Adjustment

Post by diymirage »

undo the pinch bolt, pull it off of the shaft, rotate it to where you want it and put the bolt back in
thats all ther is too it
newbbewb wrote:DIYmirage has it right.


-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
skippypinecone
Supporting Member III
Supporting Member III
Posts: 65
Joined: 08:24 am Jul 10 2011
Country:
Location: G.V. California

Re: Shift Lever Adjustment

Post by skippypinecone »

I believe I had to file a little bit of the square area off of the outside of the lever where it attatches to the shaft to get my lever where it felt good, will rub on the case if you drop it to low and don't remove some material.
gwynfryn
Member
Posts: 41
Joined: 05:51 pm Feb 04 2012
Country:
Location: New Zealand

Re: Shift Lever Adjustment

Post by gwynfryn »

skippypinecone wrote:I believe I had to file a little bit of the square area off of the outside of the lever where it attatches to the shaft to get my lever where it felt good, will rub on the case if you drop it to low and don't remove some material.

Same here.
Post Reply