throttle tube removing
-
- Member
- Posts: 239
- Joined: 08:06 pm Mar 13 2012
- Country:
throttle tube removing
How do you get the throttle tube off of the handlebar? I want to clean it. Dropped it in the mud and sand. Crap got in between tube and handlebar. Doesn't feel smooth.
2001 KDX220
-
- Supporting Member III
- Posts: 1484
- Joined: 02:26 pm Jun 29 2005
- Country:
- Location: Alabama
Re: throttle tube removing
Loosen two screws and slide it off.
If you have barkbusters you either need to remove the throttle side one or be happy enough to blow it out after removing the two screws and opening the throttle housing.
If you have barkbusters you either need to remove the throttle side one or be happy enough to blow it out after removing the two screws and opening the throttle housing.
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
- diymirage
- Supporting Member II
- Posts: 2909
- Joined: 05:00 pm Sep 19 2011
- Country:
- Location: michigan
Re: throttle tube removing
the two screws Karl mentioned are hidden underneath a flexible rubber cover
look at the throttle assemble and you'll see it
just peel the rubber back to reveal the two screws and the whole thing comes apart
look at the throttle assemble and you'll see it
just peel the rubber back to reveal the two screws and the whole thing comes apart
newbbewb wrote:DIYmirage has it right.
-1996 KDX 200 woods weapon (converted to 99 green body)
-1996 KDX 200 plated street toy (barney edition)
-2003 Yamaha TTR125-L (wifeys bike)
-1997 KDX 220 project bike
-
- Member
- Posts: 239
- Joined: 08:06 pm Mar 13 2012
- Country: