Stock sprocket / chain question

Got questions? We got answers....
Post Reply
User avatar
amstel78
Supporting Member
Posts: 158
Joined: 11:22 pm Jul 14 2012
Country:
Location: NEPA
Contact:

Stock sprocket / chain question

Post by amstel78 »

Did some searches and got a few differing answers. Just want to make sure I get the right parts. I'd like to replace the factory front and rear sprockets. I understand that they are 13/47 for a 1991 KDX200 E3. It's also to my understanding that the stock chain is a 520 type and uses 110 links? Can someone please confirm?
User avatar
SS109
KDXRider.net
KDXRider.net
Posts: 5770
Joined: 05:11 am Aug 23 2009
Country: USA
Location: Tucson, AZ, USA
Contact:

Stock sprocket / chain question

Post by SS109 »

Yes, you should be good with that setup. I'm running 13/48 currently with a 110 chain and it is tight. A 47 should give you good clearance with plenty of room to stretch.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
User avatar
amstel78
Supporting Member
Posts: 158
Joined: 11:22 pm Jul 14 2012
Country:
Location: NEPA
Contact:

Re: Stock sprocket / chain question

Post by amstel78 »

Thanks for the heads up. I've got enough chain stretch that the rear wheel chain tensioners are already set to 5.5. The sprockets are starting to look worn so it's time for a complete replacement.
the machinist
Supporting Member
Posts: 191
Joined: 11:26 pm Oct 04 2011
Country:
Location: Ridgefield, WA

Re: Stock sprocket / chain question

Post by the machinist »

If you set up an account with Rocky Mountain ATV, they will save your bike profile. This will tell you what all stock wear items are OEM, nice tool to have!
-Matt
Post Reply