help with fuel tank.

explorermw · Post by **explorermw** » 11:00 pm Apr 25 2012

i have a 99 kdx 220r that the fuel tank has cracked around the neck and the cap has cracked also. i want to replace with an aftermarket one. any site and good pricing would be appreciated.

kingmoochr · Post by **kingmoochr** » 11:33 pm Apr 25 2012

i got my clarke from ebay for 198. best deal i could find

the machinist · Post by **the machinist** » 11:48 pm Apr 25 2012

explorermw wrote:i have a 99 kdx 220r that the fuel tank has cracked around the neck and the cap has cracked also. i want to replace with an aftermarket one. any site and good pricing would be appreciated.

When you get a new cap holler at me. I'm looking to make these out of billet Aluminum, just need a good sample. Would be more than willing to pay shipping and a few bucks. I'll even give you first shot at my prototype. Also looking for a stator cover.
-Matt

turtle · Post by **turtle** » 07:37 am Apr 26 2012

the machinist wrote:
explorermw wrote:i have a 99 kdx 220r that the fuel tank has cracked around the neck and the cap has cracked also. i want to replace with an aftermarket one. any site and good pricing would be appreciated.
When you get a new cap holler at me. I'm looking to make these out of billet Aluminum, just need a good sample. Would be more than willing to pay shipping and a few bucks. I'll even give you first shot at my prototype. Also looking for a stator cover.
-Matt

Been wanting me a billet cap and blingy stator cover.

+1 on what moocher said for your tank.

Post by **SS109** » 11:19 am Apr 26 2012

There are already billet caps out there that fit the KDX. I even had some info on one of them in a thread on here and over on ThumperTalk. I can't remember off hand what I got it for as it wasn't listed for the KDX but it is the same cap. Search for "outlaw" and it should come up as that was the brand I bought.

cragwl · Post by **cragwl** » 03:05 pm Apr 26 2012

I had a cracked gas cap and replaced it with an outlaw billet cap. Looks sweet to me. Got it off fleebay for $29.00 free shipping.

the machinist · Post by **the machinist** » 11:36 pm Apr 26 2012

Thanks guys, no reason to duplicate then. How about KIPS cover, Slotted side cover, clutch cover? Just getting practice on MasterCam X. Any other projects needed?
-Matt

Post by **Julien D** » 12:08 am Apr 27 2012

the machinist wrote:Thanks guys, no reason to duplicate then. How about KIPS cover, Slotted side cover, clutch cover? Just getting practice on MasterCam X. Any other projects needed?
-Matt

E series sub valves made from something other than butter!

the machinist · Post by **the machinist** » 12:29 am Apr 27 2012

Get a hold of me thru e-mail, matt@qualitymachine-wa.com. I will need a sample piece to do a hardness test on.
-Matt

Post by **SS109** » 12:29 am Apr 27 2012

juliend wrote:
the machinist wrote:Thanks guys, no reason to duplicate then. How about KIPS cover, Slotted side cover, clutch cover? Just getting practice on MasterCam X. Any other projects needed?
-Matt
E series sub valves made from something other than butter!

Hell yes! I would love to see some improved KIPs parts.

rbates9 · Post by **rbates9** » 05:06 pm Apr 27 2012

SS109 wrote:
juliend wrote:
the machinist wrote:Thanks guys, no reason to duplicate then. How about KIPS cover, Slotted side cover, clutch cover? Just getting practice on MasterCam X. Any other projects needed?
-Matt
E series sub valves made from something other than butter!
Hell yes! I would love to see some improved KIPs parts.

Get an H!

Post by **SS109** » 05:42 pm Apr 27 2012

rbates9 wrote:Get an H!

I don't think so! Besides, I have never had a problem with my KIPS valves.

I just would like to see some quality replacements available so I can buy a set to stash away.

KDXRIDER.NET

KDXRIDER.NET