a pic of my piston for you guys to inspect

Got questions? We got answers....
Post Reply
draelas
Member
Posts: 11
Joined: 10:42 pm Mar 26 2012
Country:

a pic of my piston for you guys to inspect

Post by draelas »

so i had my tank off and figured id change out my spark plug while im at it.

i just got the bike and wasnt sure on rebuilds. anyways. i took this pic of what i could see.. looks pretty clean.. i think? also can read the serial number pretty cleanly..at least, i think its a serial number.

im very new to engines, and 2 strokes. so not really sure what it should look like..

anyways, if you looked in and saw this what would you think?

Image
Fletch
Member
Posts: 477
Joined: 05:59 pm May 01 2011
Country:
Location: Calabogie ontario canada

Post by Fletch »

I'd think Wiseco by the look of the serial #
Not carbony which is great.
If you want to see the skirts for scoring and the cylinder just pull the exhaust and have a look.
Looks good from there though.
Fletch
89 kdx 200 with 99 rm125 forks
User avatar
JoKDX220r
Gold Member
Gold Member
Posts: 201
Joined: 04:04 pm Oct 03 2008
Country:

Post by JoKDX220r »

wiseco std piston product # is : 750M06900
Seems to be that number we see on your picture

How long since you buy that bike ?
draelas
Member
Posts: 11
Joined: 10:42 pm Mar 26 2012
Country:

Post by draelas »

just got it this last weekend.

thx for the info
kingmoochr
Member
Posts: 24
Joined: 05:41 pm Mar 12 2012
Country:

Post by kingmoochr »

that thing looks brand new. what does the plug look like? i assume you've started it already?
draelas
Member
Posts: 11
Joined: 10:42 pm Mar 26 2012
Country:

Post by draelas »

the plug looked fine. to be honest i shouldnt of even bothered changing it, but i figured plugs are cheap, and im in there already. yes ive started it.

starts first kick. doesnt idle properly unless i stay on the throttle.. i think i just need to adjust the idle screw, but im gonna take it out on saturday and see how she runs once shes warmed up before i adjust anything.

could also be bad gas. the gas that was in there was a year old.. we'll see how she is on new gas
draelas
Member
Posts: 11
Joined: 10:42 pm Mar 26 2012
Country:

Post by draelas »

plug looks like this

Image
bmann
Member
Posts: 35
Joined: 03:19 am Jan 19 2010
Country:

Post by bmann »

Check your float bowl height and make sure it is in spec. You may not be getting enough fuel because it is misadjusted. Oh and if you don't have it yet, get the service manual.
Post Reply