Mid Rebuild on 2000 KDX220, few questions
Posted: 07:23 pm Mar 06 2012
Ok guys I had been putting off rebuilding the top end for some time, however today I decided to tackle it using the online manual (which is excellent by the way). Everything came apart smoothly, other than being sprayed in the face with coolant when I had to use some force to get one of the hoses off.
I have included some pics and want to see what you guys think. The piston, head, and cylinder did not look anywhere near as bad I would have thought. I was under the impression that this bike had never had a rebuild, what do you guys think? I'm pretty sure that a non Wiseco piston was in there. Also, do the reeds look stock (I want to order some power reeds and don't want to duplicate). I plan on sending the head to Ron for the mod. Other than following the manual for re-assembly, is there anything else that looks off or bad in relation to the pics I posted?
I have included some pics and want to see what you guys think. The piston, head, and cylinder did not look anywhere near as bad I would have thought. I was under the impression that this bike had never had a rebuild, what do you guys think? I'm pretty sure that a non Wiseco piston was in there. Also, do the reeds look stock (I want to order some power reeds and don't want to duplicate). I plan on sending the head to Ron for the mod. Other than following the manual for re-assembly, is there anything else that looks off or bad in relation to the pics I posted?