KDXRIDER.NET

On the last ride i had a bit of an off and dinged the exhaust. Now it does not sit quite right in the exhaust port and I am getting some blow by. I have fitted a new exhaust gasket but still does not seal properly. Tried straightening it a bit but no luck.

Does anyone have any suggestions on a thicker gasket or repair without buying a whole new front pipe.

Maybe some RTV?

You will want to get the pipe straightened back out so it won't have the tension on the exhaust port.

hi-temp sillycone


instructions for aligning http://www.piperepair.com/tips.htm

Thanks for the help guys. Will try the aligning over the weekend. Otherwise I will try some thermal rope as a slightly thicker gasket.