hehe, nice!Fletch wrote:Just don't freak out when you clearly hear "Paul is dead, Paul is dead" coming out of the backwards audio.......sparkingdogg wrote:my pleasure! take your time and watch out for any small bits dropping out, and make sure you get all the shims to reinstall. follow the factory manual as far as reassembly and tolerances. and if worst comes to worst try playing the video backwardsmattnzl wrote:Very helpfull for people like me who are a bit worried about tearing into the motor. Thanks!
How to video: Tear down a 95/06 KDX200/220 motor all the way
- sparkingdogg
- Supporting Member
- Posts: 136
- Joined: 03:10 pm Nov 22 2008
- Country:
- Location: omaha, nebraska
1999 KDX240 big bore street legal, 2008 KLX300R, 2002 XR250R stock, 1985 XL600R stock, 2001 KDX220 bone stock street legal, 1988 VN750 dresser, 1975 RD350 stock, 1983 GL650I Sliverwing Interstate with sidecar, 1975 Kawasaki F11 (early KDX!), about 15 other bikes that come and go!
- sparkingdogg
- Supporting Member
- Posts: 136
- Joined: 03:10 pm Nov 22 2008
- Country:
- Location: omaha, nebraska
haha goo goo ga joob!Fletch wrote:Just don't freak out when you clearly hear "Paul is dead, Paul is dead" coming out of the backwards audio.......sparkingdogg wrote:my pleasure! take your time and watch out for any small bits dropping out, and make sure you get all the shims to reinstall. follow the factory manual as far as reassembly and tolerances. and if worst comes to worst try playing the video backwardsmattnzl wrote:Very helpfull for people like me who are a bit worried about tearing into the motor. Thanks!
1999 KDX240 big bore street legal, 2008 KLX300R, 2002 XR250R stock, 1985 XL600R stock, 2001 KDX220 bone stock street legal, 1988 VN750 dresser, 1975 RD350 stock, 1983 GL650I Sliverwing Interstate with sidecar, 1975 Kawasaki F11 (early KDX!), about 15 other bikes that come and go!
- sparkingdogg
- Supporting Member
- Posts: 136
- Joined: 03:10 pm Nov 22 2008
- Country:
- Location: omaha, nebraska
you are welcome, i hope it helps you out. i like to watch youtube vid's before i tear into something on my car/truck, it's a nice way to see if the job is within my skill level and/or patience level. i have watched some great vid's over the years so i figured it was my turn! just remember to keep your work area clean... once i knocked a kick shaft off of the crowded tear down table, yeah little pieces flew everywhere. another time i knocked about half the crap on the floor yanking the air hose. it pays to keep your work area neat, for sure.David_L6 wrote:Good stuff! Thanks for taking the time to video the tear down and thanks for posting it for all to see.
1999 KDX240 big bore street legal, 2008 KLX300R, 2002 XR250R stock, 1985 XL600R stock, 2001 KDX220 bone stock street legal, 1988 VN750 dresser, 1975 RD350 stock, 1983 GL650I Sliverwing Interstate with sidecar, 1975 Kawasaki F11 (early KDX!), about 15 other bikes that come and go!
-
- Member
- Posts: 10
- Joined: 12:35 pm Feb 21 2014
- Country:
Re: How to video: Tear down a 95/06 KDX200/220 motor all the
Thanks a lot From Costa Rica excellent Videos!!!!!!!!!!!!!!
pura vida!!!!!!
pura vida!!!!!!