Aftermarket PIPES

[asmed12345]

Would an after market pipe (i.e. fmf gnarly etc) work fine with the stock silencerr or would I have to do something to mod them. Also, does anyone make a pipe the same color as the silencer and stock pipe?

[Julien D]

most aftermarket pipes are plated. The stock silencer will work fine with any aftermarket pipe.

[diymirage]

but i would expect you could get a can of high temp flat black paint at just about any hardware store right?

according to the sticky on mods there is no real gain in replacing the stock silencer

[rbates9]

If you went with using a high temp paint on a plated pipe it would probably fall off pretty quick unless you sand blasted the plating off. Maybe stove polish would take the heat better than a high temp paint but I think you would still need to remove the plating.