Tire Question

Got questions? We got answers....
Post Reply
User avatar
Fatherof2
Supporting Member
Posts: 224
Joined: 08:43 am Dec 14 2010
Country:
Location: Massachusetts

Tire Question

Post by Fatherof2 »

Hi Gang,

I have a question about the stock tires on my KDX.

I have the Dunlop Sports K695 on the back and the K490 on the front. These tires now have 450 miles on them. They are not cracked or dry rotted in any way. The rear is showing some signs of wear, but there is still plenty of beef on the tire. The front is in even better shape.

Anyway, a friend of mine gave me a brand new set of Pirelli MT16's. They are sitting in my basement.

I have been keeping an eye on Craigslist for a tire changer, and was able to score this for 50 bucks! (Came with tire irons and everything!)

Image

So my question is, should I put the new tires on now? Will I have much better grip and traction vs the stock tires? I ride in New England, and am a novice rider.

Thanks for any input,

David

Image
User avatar
frankenschwinn
Supporting Member II
Supporting Member II
Posts: 482
Joined: 01:20 pm Nov 28 2009
Country:

Post by frankenschwinn »

Yes change immediately...
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Post by Julien D »

Agreed, change them out. The MT16 is a good tire.

Nice tire stand, btw!
Image
User avatar
scheckaet
KDXRider.net
KDXRider.net
Posts: 3740
Joined: 12:09 am Nov 10 2005
Country:
Location: edmond oklahoma

Post by scheckaet »

the front tire is a POS, you'll see what we mean once you change it :supz:
Nice score on the tire changer :partyman:
User avatar
Fatherof2
Supporting Member
Posts: 224
Joined: 08:43 am Dec 14 2010
Country:
Location: Massachusetts

Post by Fatherof2 »

Any idea if the MT-16's are directional?

I cant seem to find any markings that would indicate that they are.
For God and Country......Geronimo, Geronimo, Geronimo!!
User avatar
rbates9
Supporting Member II
Supporting Member II
Posts: 3164
Joined: 06:07 pm Apr 27 2010
Country:
Location: UPSTATE New York

Post by rbates9 »

The stock is a pos and should be removed as soon as possible. The others will either be marked or it won't really matter.
KarlP
Supporting Member III
Supporting Member III
Posts: 1484
Joined: 02:26 pm Jun 29 2005
Country:
Location: Alabama

Post by KarlP »

Nice tire changing rig! It sure beats a 5 gallon bucket.

I'd change them both now. The stock tires are pretty awful.

Do a search on tires on here, there is lots of good information.

You did not ask, but-
I like the super heavy tubes from Moose
I use a little RTV around the valve stem and the rimlock bolt to keep gritty water out from between the tube and tire.
Put a drop of penetrating oil in each spoke nipple from the tube side. let soak an hour and wipe up excess. Your spokes will thank you two years down the road.
Ditch the rubber rim liner for a narrow strip of duct tape.
Don't be afraid to try different tire pressures. I've been running 8.5 rear, 9 front for years with no problem.

New tires are like a new pair of sneakers!
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
User avatar
Fatherof2
Supporting Member
Posts: 224
Joined: 08:43 am Dec 14 2010
Country:
Location: Massachusetts

Post by Fatherof2 »

Thanks for the input everyone!

I mounted the rear tire last nite. It took me much longer than expected due to the fact that it was my first time. I think the front will go much more quickly. (Famous last words!)

I had the new tire on when I realized that the rim lock was not inside the tire. Woops! Start over!

The biggest help is the giant bar that comes with the changer. It made all the difference for me. That said, I am still going to get a bead buddy for my next attempt.

Karl, I did go with heavy duty tubes, but I did not oil the spokes. That sounds like a good tip. Wish I had known that beforehand. I will do it to the front rim.

Lastly, what is RTV?

Thanks again everyone,

David
For God and Country......Geronimo, Geronimo, Geronimo!!
User avatar
scheckaet
KDXRider.net
KDXRider.net
Posts: 3740
Joined: 12:09 am Nov 10 2005
Country:
Location: edmond oklahoma

Post by scheckaet »

RTV : silicone
User avatar
Fatherof2
Supporting Member
Posts: 224
Joined: 08:43 am Dec 14 2010
Country:
Location: Massachusetts

Post by Fatherof2 »

>|<>QBB<
scheckaet wrote:RTV : silicone
Thank you.
Brian
Supporting Member II
Supporting Member II
Posts: 323
Joined: 08:31 pm Aug 26 2009
Country:
Location: Brush Prairie Washington

Post by Brian »

RTV stands for Room Temperature Vulcanizing. It's a silicone based adhesive.
KX 250, KDX 220, KDX 220, KDX 200, CR 80

I don't believe in a society where the thrill of living is traded for the safety of existance---Nick Inatsch
User avatar
220ripper
Supporting Member II
Supporting Member II
Posts: 82
Joined: 10:29 pm Oct 13 2010
Country:

Post by 220ripper »

My friend has the bead buddy , we used it on my last tire change but it didnt work any better than a pair of locking needle nose pliers with electrical tape over the teeth...
User avatar
frankenschwinn
Supporting Member II
Supporting Member II
Posts: 482
Joined: 01:20 pm Nov 28 2009
Country:

Post by frankenschwinn »

>|<>QBB<
220ripper wrote:My friend has the bead buddy , we used it on my last tire change but it didnt work any better than a pair of locking needle nose pliers with electrical tape over the teeth...
I love the bead buddy.
Post Reply