wiesco 2001 kdx 200 piston?
-
- Member
- Posts: 2
- Joined: 01:15 pm Jun 18 2011
- Country:
wiesco 2001 kdx 200 piston?
Hi i am installing a new piston and rings in my 2001 kdx 200 i sent the cylinder to fredette racing to have it ported anyway i just got the piston and its a wiseco and i measured it and the diameter is 66.5 mm and this is wiescos standerd size. and the old piston is 65.7 mm (worn) and the manual calls for 65.9mm can somone out there answer this question. is this an oversized piston? Thankyou.
-
- Member
- Posts: 10
- Joined: 06:46 pm Jul 31 2011
- Country:
- Location: Colorado Springs, CO USA
Wiseco says it's first oversize: http://www.wiseco.com/ProductSearch.aspx
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
std bore is 66.00 mm
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS