carb problems
-
- Member
- Posts: 36
- Joined: 11:16 pm May 16 2011
- Country:
- Location: central city, ky
carb problems
I thought I had the carb on my 220 fixed, but it's still not right. I'm down to a 38 PJ, 142 MJ and the stock needle is on the top groove. The idle mixture screw doesn't work very well. If I turn it in all the way the engine will load up and quit. If I turn it out 2 turns it runs pretty good, but I can also take the screw completely out and it still runs the same. I don't think that's right. It still doesn't run smooth on the bottom end. It's pretty good at WOT. I've got a 36 PJ coming, so I'm going to try that when it gets here. Anybody else had any problems like this?
'98 KDX220