JETTING info for Taylor park CO

Got questions? We got answers....
Post Reply
trex
Member
Posts: 44
Joined: 06:36 pm Dec 08 2009
Country:

JETTING info for Taylor park CO

Post by trex »

Anyone ride there with a kdx?I think it at 9000 ft looking for a place to start. Thanks
UI Vandal
Supporting Member I
Supporting Member I
Posts: 34
Joined: 03:54 pm Jun 29 2011
Country:
Location: Idaho Falls, ID

Post by UI Vandal »

KDX 200 or 220? What mods? What type of riding (putting around tight singel track, or WOT)?
trex
Member
Posts: 44
Joined: 06:36 pm Dec 08 2009
Country:

Post by trex »

A 220 and 200 as far as riding a little of every thing.
User avatar
marrk_us
Supporting Member I
Supporting Member I
Posts: 141
Joined: 02:18 am Nov 06 2007
Country:
Location: fountain, Colorado

Post by marrk_us »

I've been riding the Divide Colorado area (9000ft) since 1985 on various kdx's. On my hybrid I run a 145 main jet, 48 pilot, and a CGK 017-018 needle set on the 4th clip from the top (out of 5) or (next to bottom). Air screw 1.75-2 turns out depending on conditions. Mods, FMF woods pipe, e35 acerbis carbon can w/spark arres., Rad valve, and snorkel removed from air box. I've used the same jetting/settings on several friends kdx's throughout the years with no problems. A tad rich for a stock bike but no fouling and near spot on for the modded bikes. Hope this helps.
Post Reply