JETTING info for Taylor park CO
-
- Member
- Posts: 44
- Joined: 06:36 pm Dec 08 2009
- Country:
JETTING info for Taylor park CO
Anyone ride there with a kdx?I think it at 9000 ft looking for a place to start. Thanks
- marrk_us
- Supporting Member I
- Posts: 141
- Joined: 02:18 am Nov 06 2007
- Country:
- Location: fountain, Colorado
I've been riding the Divide Colorado area (9000ft) since 1985 on various kdx's. On my hybrid I run a 145 main jet, 48 pilot, and a CGK 017-018 needle set on the 4th clip from the top (out of 5) or (next to bottom). Air screw 1.75-2 turns out depending on conditions. Mods, FMF woods pipe, e35 acerbis carbon can w/spark arres., Rad valve, and snorkel removed from air box. I've used the same jetting/settings on several friends kdx's throughout the years with no problems. A tad rich for a stock bike but no fouling and near spot on for the modded bikes. Hope this helps.