1994 KDX200 NEED ADVISE

Got questions? We got answers....
Post Reply
KAWGREENBOY
Member
Posts: 4
Joined: 01:17 am Jun 25 2011
Country:
Location: Oklahoma

1994 KDX200 NEED ADVISE

Post by KAWGREENBOY »

kDX WILL NOT IDLE, CLEANED CARB, SET FLOAT, ADJUSTED IDLE SCREW IN, OUT NO CHANGE. BIKE WOULD IDLE BEFORE I CLEANED CARB IT WAS JUST BOGGING DOWN. NOW WILL NOT IDLE. SON PUTS AROUND YARD SO IT IS FOULING PLUGS LIKE CRAZY ALSO SMOKING. MIXING 40.1 AFTER SETTING FLOAT ONE MORE TIME I TOOK DOWN ROAD 2MILES WHEN I GOT BACK, HEAVY SPOOG, SILENCER WAS GLOWING RED INSIDE WITH FLAMES. COULD EXPANSION CHAMBER HAVE HAD ALOT OF OIL RESIDUE IN IT? ANY AND ALL HELP GREATLY APPRECIATED.
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

quit yer fugging yelling!
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
User avatar
spaun
Supporting Member
Posts: 36
Joined: 11:55 am Jun 18 2011
Country:

Post by spaun »

Remind me not to let you clean my carb. :roll: Gotta be something you did.
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Post by Julien D »

1st, welcome to the forum!

2nd, all caps is considered yelling, and taken as rudeness on a forum :)

3rd, you need to go back through the carb again. Sounds like the pilot circuit is clogged.

And yes, there could have been residual oil / fuel in the pipe, especially if the float was stuck open flooding it out. Clean pipe, re-pack silencer, go back through the carb. Do NOT soak the entire carb in any immersion cleaner, unless you remove the jet block 1st. You can soak the jet block too, but not the gasket. The rubber jet block gasket will corrode if you soak it, causing all sorts of problems.
Image
KAWGREENBOY
Member
Posts: 4
Joined: 01:17 am Jun 25 2011
Country:
Location: Oklahoma

Post by KAWGREENBOY »

Thanks for the welcome, sorry for the caps. Was not meaning for anyone to take it as yelling. Thanks for the info. Is there any way to clean pilot circuit with out soaking? Have taken pilot out and blew air threw it, does not seemed to be plugged. Bike starting and running fine today other than not idling. still alot of smoke at 40.1. will try it again. thanks.
User avatar
scheckaet
KDXRider.net
KDXRider.net
Posts: 3740
Joined: 12:09 am Nov 10 2005
Country:
Location: edmond oklahoma

Post by scheckaet »

some use a guitar string to clean the jets.
where do you ride? drapper?
KAWGREENBOY
Member
Posts: 4
Joined: 01:17 am Jun 25 2011
Country:
Location: Oklahoma

Post by KAWGREENBOY »

Will have to get some. I dont ride just working on son's bike. There is a track in Okmulgee, right off of Hwy 75, its called alpha motocross. 2O bucks for a day pass. You can check out there website at alphamotocross.com.
User avatar
scheckaet
KDXRider.net
KDXRider.net
Posts: 3740
Joined: 12:09 am Nov 10 2005
Country:
Location: edmond oklahoma

Post by scheckaet »

20 bux a day??? :blink:
User avatar
SS109
KDXRider.net
KDXRider.net
Posts: 5770
Joined: 05:11 am Aug 23 2009
Country: USA
Location: Tucson, AZ, USA
Contact:

Post by SS109 »

>|<>QBB<
scheckaet wrote:20 bux a day??? :blink:
That isn't uncommon for MX tracks. Our local track is $25 a day for non-members.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
Post Reply