Carb Holder interchageability between E and H models

Got questions? We got answers....
Post Reply
Smoke
Member
Posts: 4
Joined: 09:21 am Jan 05 2011
Country:

Carb Holder interchageability between E and H models

Post by Smoke »

My card holder boot cracked and my temporary fix was electrical tape and some silicone...but it is not cutting it anymore!!

I have a 89 KDX200 and was wondering if the newer (95-06) model KDX200 manifold/carb holder boot interchange.

Any help please

Thanks

Checked an online part fiche and numbers are the same but another sub number is different....so I 'm not sure!
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

If the numbers don't match it most likely will not work
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
Smoke
Member
Posts: 4
Joined: 09:21 am Jan 05 2011
Country:

Post by Smoke »

Well the fiche numbers match but bike bandits numbers do not...

also, while I'm at it, what about the rear shock?

thanks
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

Fiche number do not match

H = 16065-1298

E = 16065-1181
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
Smoke
Member
Posts: 4
Joined: 09:21 am Jan 05 2011
Country:

Post by Smoke »

that answers my question...thanks for your time!
KDXsg
Member
Posts: 358
Joined: 09:12 pm Nov 30 2009
Country:
Location: Singapore

Post by KDXsg »

they are interchangeble.
A true KDX customizer!!
User avatar
rbates9
Supporting Member II
Supporting Member II
Posts: 3164
Joined: 06:07 pm Apr 27 2010
Country:
Location: UPSTATE New York

Post by rbates9 »

FWIW, The VForce reed set up is the same from 89? to 06 so the bolt pattern should line up. As far as the bend of the boot I can't say.
Post Reply